add pkg mecharm:include m5, pi and moveit

2026-07-05 19:47:04 +00:00 · 2022-07-08 09:41:20 +08:00 · 2022-07-08 09:41:20 +08:00 · 0690b71843
commit 0690b71843
parent 1d9f71c297
64 changed files with 3431 additions and 51 deletions
--- a/mecharm/mecharm/CMakeLists.txt
+++ b/mecharm/mecharm/CMakeLists.txt
@ -0,0 +1,45 @@
+cmake_minimum_required(VERSION 3.0.2)
+project(mecharm)
+
+add_compile_options(-std=c++11)
+
+## Find catkin and any catkin packages
+find_package(catkin REQUIRED COMPONENTS
+  roscpp
+  rospy
+  std_msgs
+  actionlib
+  image_transport
+  cv_bridge
+)
+
+## Declare a catkin package
+catkin_package(
+  CATKIN_DEPENDS std_msgs actionlib
+)
+
+## Build talker and listener
+include_directories(include ${catkin_INCLUDE_DIRS} ${OpenCV_INCLUDE_DIRS})
+
+catkin_install_python(PROGRAMS
+  scripts/follow_display.py
+  scripts/slider_control.py
+  scripts/teleop_keyboard.py
+  scripts/listen_real.py
+  scripts/listen_real_of_topic.py
+  scripts/detect_marker.py
+  scripts/following_marker.py
+  scripts/follow_and_pump.py
+  scripts/simple_gui.py
+  DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
+)
+
+install(DIRECTORY launch DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}
+  PATTERN "setup_assistant.launch" EXCLUDE)
+install(DIRECTORY config DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
+
+# find_package(OpenCV REQUIRED)
+# add_executable(opencv_camera src/opencv_camera)
+# target_link_libraries(opencv_camera ${catkin_LIBRARIES} ${OpenCV_LIBRARIES})
+# add_executable(camera_display src/camera_display)
+# target_link_libraries(camera_display ${catkin_LIBRARIES} ${OpenCV_LIBRARIES})
--- a/mecharm/mecharm/LICENSE
+++ b/mecharm/mecharm/LICENSE
@ -0,0 +1,25 @@
+BSD 2-Clause License
+
+Copyright (c) 2020, Elephant Robotics
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--- a/mecharm/mecharm/config/mecharm.rviz
+++ b/mecharm/mecharm/config/mecharm.rviz
@ -0,0 +1,202 @@
+Panels:
+  - Class: rviz/Displays
+    Help Height: 78
+    Name: Displays
+    Property Tree Widget:
+      Expanded:
+        - /Global Options1
+        - /Status1
+        - /TF1
+      Splitter Ratio: 0.5
+    Tree Height: 607
+  - Class: rviz/Selection
+    Name: Selection
+  - Class: rviz/Tool Properties
+    Expanded:
+      - /2D Pose Estimate1
+      - /2D Nav Goal1
+      - /Publish Point1
+    Name: Tool Properties
+    Splitter Ratio: 0.588679016
+  - Class: rviz/Views
+    Expanded:
+      - /Current View1
+    Name: Views
+    Splitter Ratio: 0.5
+  - Class: rviz/Time
+    Experimental: false
+    Name: Time
+    SyncMode: 0
+    SyncSource: ""
+Toolbars:
+  toolButtonStyle: 2
+Visualization Manager:
+  Class: ""
+  Displays:
+    - Alpha: 0.5
+      Cell Size: 1
+      Class: rviz/Grid
+      Color: 160; 160; 164
+      Enabled: true
+      Line Style:
+        Line Width: 0.0299999993
+        Value: Lines
+      Name: Grid
+      Normal Cell Count: 0
+      Offset:
+        X: 0
+        Y: 0
+        Z: 0
+      Plane: XY
+      Plane Cell Count: 10
+      Reference Frame: <Fixed Frame>
+      Value: true
+    - Alpha: 1
+      Class: rviz/RobotModel
+      Collision Enabled: false
+      Enabled: true
+      Links:
+        All Links Enabled: true
+        Expand Joint Details: false
+        Expand Link Details: false
+        Expand Tree: false
+        Link Tree Style: Links in Alphabetic Order
+        base:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        link1:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        link2:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        link3:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        link4:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        link5:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        link6:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+      Name: RobotModel
+      Robot Description: robot_description
+      TF Prefix: ""
+      Update Interval: 0
+      Value: true
+      Visual Enabled: true
+    - Class: rviz/TF
+      Enabled: true
+      Frame Timeout: 15
+      Frames:
+        All Enabled: true
+        base:
+          Value: true
+        link1:
+          Value: true
+        link2:
+          Value: true
+        link3:
+          Value: true
+        link4:
+          Value: true
+        link5:
+          Value: true
+        link6:
+          Value: true
+      Marker Scale: 0.200000003
+      Name: TF
+      Show Arrows: true
+      Show Axes: true
+      Show Names: true
+      Tree:
+        base:
+          link1:
+            link2:
+              link3:
+                link4:
+                  link5:
+                    link6:
+                      {}
+      Update Interval: 0
+      Value: true
+  Enabled: true
+  Global Options:
+    Background Color: 48; 48; 48
+    Default Light: true
+    Fixed Frame: base
+    Frame Rate: 30
+  Name: root
+  Tools:
+    - Class: rviz/Interact
+      Hide Inactive Objects: true
+    - Class: rviz/MoveCamera
+    - Class: rviz/Select
+    - Class: rviz/FocusCamera
+    - Class: rviz/Measure
+    - Class: rviz/SetInitialPose
+      Topic: /initialpose
+    - Class: rviz/SetGoal
+      Topic: /move_base_simple/goal
+    - Class: rviz/PublishPoint
+      Single click: true
+      Topic: /clicked_point
+  Value: true
+  Views:
+    Current:
+      Class: rviz/Orbit
+      Distance: 0.949513793
+      Enable Stereo Rendering:
+        Stereo Eye Separation: 0.0599999987
+        Stereo Focal Distance: 1
+        Swap Stereo Eyes: false
+        Value: false
+      Focal Point:
+        X: 0
+        Y: 0
+        Z: 0
+      Focal Shape Fixed Size: true
+      Focal Shape Size: 0.0500000007
+      Invert Z Axis: false
+      Name: Current View
+      Near Clip Distance: 0.00999999978
+      Pitch: 0.629796803
+      Target Frame: <Fixed Frame>
+      Value: Orbit (rviz)
+      Yaw: 2.05177665
+    Saved: ~
+Window Geometry:
+  Displays:
+    collapsed: false
+  Height: 888
+  Hide Left Dock: false
+  Hide Right Dock: false
+  QMainWindow State: 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
+  Selection:
+    collapsed: false
+  Time:
+    collapsed: false
+  Tool Properties:
+    collapsed: false
+  Views:
+    collapsed: false
+  Width: 1853
+  X: 65
+  Y: 24
--- a/mecharm/mecharm/config/mycobot_with_marker.rviz
+++ b/mecharm/mecharm/config/mycobot_with_marker.rviz
@ -0,0 +1,216 @@
+Panels:
+  - Class: rviz/Displays
+    Help Height: 78
+    Name: Displays
+    Property Tree Widget:
+      Expanded:
+        - /Global Options1
+        - /Status1
+        - /RobotModel1
+        - /TF1
+        - /Marker1
+        - /Marker1/Namespaces1
+      Splitter Ratio: 0.5
+    Tree Height: 775
+  - Class: rviz/Selection
+    Name: Selection
+  - Class: rviz/Tool Properties
+    Expanded:
+      - /2D Pose Estimate1
+      - /2D Nav Goal1
+      - /Publish Point1
+    Name: Tool Properties
+    Splitter Ratio: 0.588679016
+  - Class: rviz/Views
+    Expanded:
+      - /Current View1
+    Name: Views
+    Splitter Ratio: 0.5
+  - Class: rviz/Time
+    Experimental: false
+    Name: Time
+    SyncMode: 0
+    SyncSource: ""
+Toolbars:
+  toolButtonStyle: 2
+Visualization Manager:
+  Class: ""
+  Displays:
+    - Alpha: 0.5
+      Cell Size: 1
+      Class: rviz/Grid
+      Color: 160; 160; 164
+      Enabled: true
+      Line Style:
+        Line Width: 0.0299999993
+        Value: Lines
+      Name: Grid
+      Normal Cell Count: 0
+      Offset:
+        X: 0
+        Y: 0
+        Z: 0
+      Plane: XY
+      Plane Cell Count: 10
+      Reference Frame: <Fixed Frame>
+      Value: true
+    - Alpha: 1
+      Class: rviz/RobotModel
+      Collision Enabled: false
+      Enabled: true
+      Links:
+        All Links Enabled: true
+        Expand Joint Details: false
+        Expand Link Details: false
+        Expand Tree: false
+        Link Tree Style: Links in Alphabetic Order
+        joint1:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        joint2:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        joint3:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        joint4:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        joint5:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        joint6:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+        joint6_flange:
+          Alpha: 1
+          Show Axes: false
+          Show Trail: false
+          Value: true
+      Name: RobotModel
+      Robot Description: robot_description
+      TF Prefix: ""
+      Update Interval: 0
+      Value: true
+      Visual Enabled: true
+    - Class: rviz/TF
+      Enabled: true
+      Frame Timeout: 15
+      Frames:
+        All Enabled: true
+        basic_shapes:
+          Value: true
+        joint1:
+          Value: true
+        joint2:
+          Value: true
+        joint3:
+          Value: true
+        joint4:
+          Value: true
+        joint5:
+          Value: true
+        joint6:
+          Value: true
+        joint6_flange:
+          Value: true
+      Marker Scale: 0.300000012
+      Name: TF
+      Show Arrows: true
+      Show Axes: true
+      Show Names: true
+      Tree:
+        joint1:
+          joint2:
+            joint3:
+              joint4:
+                joint5:
+                  joint6:
+                    joint6_flange:
+                      basic_shapes:
+                        {}
+      Update Interval: 0
+      Value: true
+    - Class: rviz/Marker
+      Enabled: true
+      Marker Topic: /visualization_marker
+      Name: Marker
+      Namespaces:
+        basic_cube: true
+      Queue Size: 100
+      Value: true
+  Enabled: true
+  Global Options:
+    Background Color: 48; 48; 48
+    Default Light: true
+    Fixed Frame: joint1
+    Frame Rate: 30
+  Name: root
+  Tools:
+    - Class: rviz/Interact
+      Hide Inactive Objects: true
+    - Class: rviz/MoveCamera
+    - Class: rviz/Select
+    - Class: rviz/FocusCamera
+    - Class: rviz/Measure
+    - Class: rviz/SetInitialPose
+      Topic: /initialpose
+    - Class: rviz/SetGoal
+      Topic: /move_base_simple/goal
+    - Class: rviz/PublishPoint
+      Single click: true
+      Topic: /clicked_point
+  Value: true
+  Views:
+    Current:
+      Class: rviz/Orbit
+      Distance: 2.11990476
+      Enable Stereo Rendering:
+        Stereo Eye Separation: 0.0599999987
+        Stereo Focal Distance: 1
+        Swap Stereo Eyes: false
+        Value: false
+      Focal Point:
+        X: -0.0706475973
+        Y: -0.0814988762
+        Z: 0.107583851
+      Focal Shape Fixed Size: true
+      Focal Shape Size: 0.0500000007
+      Invert Z Axis: false
+      Name: Current View
+      Near Clip Distance: 0.00999999978
+      Pitch: 0.375398338
+      Target Frame: <Fixed Frame>
+      Value: Orbit (rviz)
+      Yaw: 0.235389769
+    Saved: ~
+Window Geometry:
+  Displays:
+    collapsed: false
+  Height: 1056
+  Hide Left Dock: false
+  Hide Right Dock: false
+  QMainWindow State: 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
+  Selection:
+    collapsed: false
+  Time:
+    collapsed: false
+  Tool Properties:
+    collapsed: false
+  Views:
+    collapsed: false
+  Width: 1855
+  X: 65
+  Y: 24
--- a/mecharm/mecharm/launch/detect_marker.launch
+++ b/mecharm/mecharm/launch/detect_marker.launch
@ -0,0 +1,18 @@
+<launch>
+	<!-- Load file model ，加载文件模型-->
+	<arg name="model" default="$(find mycobot_description)/urdf/mycobot/mycobot_urdf.urdf"/>
+	<arg name="rvizconfig" default="$(find mycobot_280)/config/mycobot_with_marker.rviz" />
+	<arg name="gui" default="true" />
+
+	<arg name="num" default="0" />
+
+    <include file="$(find mycobot_280)/launch/slider_control.launch">
+		<arg name="model" value="$(arg model)" />
+		<arg name="rvizconfig" value="$(arg rvizconfig)" />
+		<arg name="gui" value="$(arg gui)" />
+    </include>
+	<!-- vision node -->
+	<node name="opencv_camera" pkg="mycobot_280" type="opencv_camera" args="$(arg num)"/>
+	<node name="detect_marker" pkg="mycobot_280" type="detect_marker.py" />
+	<node name="following_marker" pkg="mycobot_280" type="following_marker.py" />
+</launch>
--- a/mecharm/mecharm/launch/detect_marker_with_topic.launch
+++ b/mecharm/mecharm/launch/detect_marker_with_topic.launch
@ -0,0 +1,31 @@
+<launch>
+	<!-- Select connecting device and serial port ，选择连接设备及串口-->
+	<arg name="port" default="/dev/ttyAMA0" />
+	<arg name="baud" default="1000000" />
+	
+	<!-- Load file model ，加载文件模型-->
+	<arg name="model" default="$(find mycobot_description)/urdf/mycobot/mycobot_urdf.urdf"/>
+	<arg name="rvizconfig" default="$(find mycobot_280)/config/mycobot_with_marker.rviz" />
+	<arg name="gui" default="false" />
+
+	<arg name="num" default="0" />
+
+	<param name="robot_description" command="$(find xacro)/xacro --inorder $(arg model)" />
+
+	<!-- Combinejoin values to TF，将值合并到 TF -->
+	<node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" />
+	<!-- Show in Rviz -->
+	<node name="rviz" pkg="rviz" type="rviz" args="-d $(arg rvizconfig)" required="true" />
+
+	<!-- mycobot-topics ,mycobot-话题-->
+    <include file="$(find mycobot_communication)/launch/communication_topic.launch">
+		<arg name="port" value="$(arg port)" />	
+		<arg name="baud" value="$(arg baud)" />	
+    </include>
+	<!-- listen and pub the real angles，坚听并发布真实的角度 -->
+	<node name="real_listener" pkg="mycobot_280" type="listen_real_of_topic.py" />
+	<!-- vision node -->
+	<node name="opencv_camera" pkg="mycobot_280" type="opencv_camera" args="$(arg num)"/>
+	<node name="detect_marker" pkg="mycobot_280" type="detect_marker.py" />
+	<node name="following_marker" pkg="mycobot_280" type="following_marker.py" />
+</launch>
--- a/mecharm/mecharm/launch/follow.launch
+++ b/mecharm/mecharm/launch/follow.launch
@ -0,0 +1,14 @@
+<launch>
+	<!-- Load file model .加载文件模型-->
+	<arg name="model" default="$(find mycobot_description)/urdf/mecharm/mecharm_urdf.urdf"/>
+	<arg name="rvizconfig" default="$(find mecharm)/config/mecharm.rviz" />
+
+	<param name="robot_description" command="$(find xacro)/xacro --inorder $(arg model)" />
+
+	<!-- Combinejoin values to TF .将值合并到 TF-->
+	<node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" >
+		<rosparam param="source_list" subst_value="true">["joint_states"]</rosparam>
+	</node>
+	<!-- Show in Rviz ，显示在Rviz-->
+	<node name="rviz" pkg="rviz" type="rviz" args="-d $(arg rvizconfig)" required="true" />
+</launch>
--- a/mecharm/mecharm/launch/simple_gui.launch
+++ b/mecharm/mecharm/launch/simple_gui.launch
@ -0,0 +1,24 @@
+<launch>
+	<!-- Select connecting device and serial port ，选择连接设备及串口-->
+	<arg name="port" default="/dev/ttyUSB0" />
+	<arg name="baud" default="115200" />
+	<!-- Load file model ，加载文件模型-->
+	<arg name="model" default="$(find mycobot_description)/urdf/mecharm/mecharm_urdf.urdf"/>
+	<arg name="rvizconfig" default="$(find mecharm)/config/mecharm.rviz" />
+	<arg name="gui" default="false" />
+
+	<param name="robot_description" command="$(find xacro)/xacro --inorder $(arg model)" />
+
+	<!-- Combinejoin values to TF，将值合并到 TF-->
+	<node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" />
+	<!-- Show in Rviz -->
+	<node name="rviz" pkg="rviz" type="rviz" args="-d $(arg rvizconfig)" required="true" />
+	<!-- mycobot-topics, mycobot-话题-->
+    <include file="$(find mecharm_communication)/launch/communication_service.launch">
+		<arg name="port" value="$(arg port)" />	
+		<arg name="baud" value="$(arg baud)" />	
+    </include>
+	<!-- listen and pub the real angles ，监听并发布真实角度-->
+	<node name="real_listener" pkg="mecharm" type="listen_real.py" />
+	<node name="simple_gui" pkg="mecharm" type="simple_gui.py" />
+</launch>
--- a/mecharm/mecharm/launch/slider_control.launch
+++ b/mecharm/mecharm/launch/slider_control.launch
@ -0,0 +1,25 @@
+<launch>
+	<!-- <arg name="port" default="/dev/ttyAMA0" />
+	<arg name="baud" default="1000000" /> -->
+	
+	<!-- Load file model ，加载文件模型-->
+	<arg name="model" default="$(find mycobot_description)/urdf/mecharm/mecharm_urdf.urdf"/>
+	<arg name="rvizconfig" default="$(find mecharm)/config/mecharm.rviz" />
+	<arg name="gui" default="true" />
+
+	<param name="robot_description" command="$(find xacro)/xacro --inorder $(arg model)" />
+
+	<!-- Combinejoin values to TF， 将值合并到TF-->
+	<node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" />
+	<node name="joint_state_publisher_gui" pkg="joint_state_publisher_gui" type="joint_state_publisher_gui"> 
+		<!-- <param name="use_gui" value="$(arg gui)" />	 -->
+		<!-- <rosparam param="source_list" subst_value="true">["joint_states"]</rosparam> -->
+	</node>
+	<!-- Open control script -->
+	<!-- <node name="control_slider" pkg="mycobot_280" type="slider_control.py"> 
+		<param name="port" type="string" value="$(arg port)" />
+		<param name="baud" type="int" value="$(arg baud)" />
+	</node> -->
+	<!-- Show in Rviz，显示在Rviz -->
+	<node name="rviz" pkg="rviz" type="rviz" args="-d $(arg rvizconfig)" required="true" />
+</launch>
--- a/mecharm/mecharm/launch/teleop_keyboard.launch
+++ b/mecharm/mecharm/launch/teleop_keyboard.launch
@ -0,0 +1,28 @@
+<launch>
+	<!-- Select connecting device and serial port ，选择连接设备及串口-->
+	<arg name="port" default="/dev/ttyUSB0" />
+	<arg name="baud" default="115200" />
+
+	<!-- Load file model ，加载文件模型-->
+	<!-- <arg name="model" default="$(find mycobot_description)/urdf/260_urdf/mycobot_urdf.urdf"/>
+	<arg name="rvizconfig" default="$(find mycobot_280)/config/mycobot.rviz" /> -->
+	<arg name="model" default="$(find mycobot_description)/urdf/mecharm/mecharm_urdf.urdf"/>
+	<arg name="rvizconfig" default="$(find mecharm)/config/mecharm.rviz" />
+	<arg name="gui" default="false" />
+
+	<param name="robot_description" command="$(find xacro)/xacro --inorder $(arg model)" />
+
+	<!-- Combinejoin values to TF ，将值合并到TF-->
+	<node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" />
+	<!-- Show in Rviz -->
+	<node name="rviz" pkg="rviz" type="rviz" args="-d $(arg rvizconfig)" required="true" />
+
+	<!-- mycobot-topics，mycobot-话题 -->
+    <include file="$(find mecharm_communication)/launch/communication_service.launch">
+		<arg name="port" value="$(arg port)" />	
+		<arg name="baud" value="$(arg baud)" />	
+    </include>
+
+	<!-- listen and pub the real angles ，监听并发布真实话题-->
+	<node name="real_listener" pkg="mecharm" type="listen_real.py" />
+</launch>
--- a/mecharm/mecharm/launch/test.launch
+++ b/mecharm/mecharm/launch/test.launch
@ -0,0 +1,18 @@
+<launch>
+	<!-- Load file model，加载文件模型 -->
+	<arg name="model" default="$(find mycobot_description)/urdf/mecharm/mecharm_urdf.urdf"/>
+	<arg name="rvizconfig" default="$(find mecharm)/config/mecharm.rviz" />
+
+	<arg name="gui" default="true" />
+
+	<param name="robot_description" command="$(find xacro)/xacro --inorder $(arg model)" />
+
+	<!-- Combinejoin values to TF ，将值合并到TF-->
+	<node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" />
+	<node name="joint_state_publisher" pkg="joint_state_publisher" type="joint_state_publisher">
+		<param name="use_gui" value="$(arg gui)" />
+		<!-- <rosparam param="source_list" subst_value="true">["joint_states"]</rosparam> -->
+	</node>
+	<!-- Show in Rviz.显示在Rviz -->
+	<node name="rviz" pkg="rviz" type="rviz" args="-d $(arg rvizconfig)" required="true" />
+</launch>
--- a/mecharm/mecharm/package.xml
+++ b/mecharm/mecharm/package.xml
@ -0,0 +1,47 @@
+<?xml version="1.0"?>
+<package format="2">
+  <name>mecharm</name>
+  <version>0.0.0</version>
+  <description>The mecharm package</description>
+
+ <author email="weijian.wang@elephantrobotics.com">WangWeiJian</author>
+  <maintainer email="weijian.wang@elephantrobotics.com">WangWeiJian</maintainer>
+
+  <license>BSD</license>
+
+  <url type="website">https://github.com/elephantrobotics/mycobot_ros</url>
+
+  <buildtool_depend>catkin</buildtool_depend>
+
+  <build_depend>roscpp</build_depend>
+  <build_depend>rospy</build_depend>
+  <build_depend>std_msgs</build_depend>
+  <build_depend>actionlib</build_depend>
+  <build_depend>mycobot_description</build_depend>
+  <build_depend>mecharm_communication</build_depend>
+
+  <build_export_depend>mecharm_communication</build_export_depend>
+  <build_export_depend>mycobot_description</build_export_depend>
+
+  <exec_depend>roscpp</exec_depend>
+  <exec_depend>rospy</exec_depend>
+  <exec_depend>std_msgs</exec_depend>
+  <exec_depend>actionlib</exec_depend>
+  <exec_depend>joint_state_publisher</exec_depend>
+  <exec_depend>joint_state_publisher_gui</exec_depend>
+  <exec_depend>robot_state_publisher</exec_depend>
+  <exec_depend>xacro</exec_depend>
+  <exec_depend>joy</exec_depend>
+  <exec_depend>rviz</exec_depend>
+  <exec_depend>controller_manager</exec_depend>
+  <exec_depend>python-tk</exec_depend>
+  <exec_depend>mycobot_description</exec_depend>
+  <exec_depend>mecharm_communication</exec_depend>
+
+
+  <!-- The export tag contains other, unspecified, tags -->
+  <export>
+    <!-- Other tools can request additional information be placed here -->
+
+  </export>
+</package>
--- a/mecharm/mecharm/scripts/detect_marker.py
+++ b/mecharm/mecharm/scripts/detect_marker.py
@ -0,0 +1,125 @@
+#!/usr/bin/env python
+# -*- coding:utf-8 -*-
+import rospy
+import cv2 as cv
+import numpy as np
+from cv_bridge import CvBridge, CvBridgeError
+from sensor_msgs.msg import Image
+import tf
+from tf.broadcaster import TransformBroadcaster
+import tf_conversions
+from mycobot_communication.srv import (
+    GetCoords,
+    SetCoords,
+    GetAngles,
+    SetAngles,
+    GripperStatus,
+)
+
+
+class ImageConverter:
+    def __init__(self):
+        self.br = TransformBroadcaster()
+        self.bridge = CvBridge()
+        self.aruco_dict = cv.aruco.Dictionary_get(cv.aruco.DICT_6X6_250)
+        self.aruo_params = cv.aruco.DetectorParameters_create()
+        calibrationParams = cv.FileStorage(
+            "calibrationFileName.xml", cv.FILE_STORAGE_READ
+        )
+        self.dist_coeffs = calibrationParams.getNode("distCoeffs").mat()
+        self.camera_matrix = None
+        # subscriber, listen wether has img come in. 订阅者，监听是否有img进来
+        self.image_sub = rospy.Subscriber("/camera/image", Image, self.callback)
+
+    def callback(self, data):
+        """Callback function.
+
+        Process image with OpenCV, detect Mark to get the pose. Then acccording the
+        pose to transforming.
+        """
+        try:
+            # trans `rgb` to `gbr` for opencv. 将 `rgb` 转换为 opencv 的 `gbr`。
+            cv_image = self.bridge.imgmsg_to_cv2(data, "bgr8")
+        except CvBridgeError as e:
+            print(e)
+        size = cv_image.shape
+        focal_length = size[1]
+        center = [size[1] / 2, size[0] / 2]
+        if self.camera_matrix is None:
+            # calc the camera matrix, if don't have. 如果没有就计算相机矩阵
+            self.camera_matrix = np.array(
+                [
+                    [focal_length, 0, center[0]],
+                    [0, focal_length, center[1]],
+                    [0, 0, 1],
+                ],
+                dtype=np.float32,
+            )
+        gray = cv.cvtColor(cv_image, cv.COLOR_BGR2GRAY)
+        # detect aruco marker. 检测 aruco 标记。
+        ret = cv.aruco.detectMarkers(gray, self.aruco_dict, parameters=self.aruo_params)
+        corners, ids = ret[0], ret[1]
+        # process marker data.
+        if len(corners) > 0:
+            if ids is not None:
+                # print('corners:', corners, 'ids:', ids)
+
+                # detect marker pose. 检测标记姿势
+                # argument:
+                #   marker corners, 标记角
+                #   marker size (meter), 标记尺寸（米）
+                ret = cv.aruco.estimatePoseSingleMarkers(
+                    corners, 0.05, self.camera_matrix, self.dist_coeffs
+                )
+                (rvec, tvec) = (ret[0], ret[1])
+                (rvec - tvec).any()
+
+                print("rvec:", rvec, "tvec:", tvec)
+
+                # just select first one detected marker. 只需选择第一个检测到的标记
+                for i in range(rvec.shape[0]):
+                    cv.aruco.drawDetectedMarkers(cv_image, corners)
+                    cv.aruco.drawAxis(
+                        cv_image,
+                        self.camera_matrix,
+                        self.dist_coeffs,
+                        rvec[i, :, :],
+                        tvec[i, :, :],
+                        0.03,
+                    )
+
+                xyz = tvec[0, 0, :]
+                xyz = [xyz[0] - 0.045, xyz[1], xyz[2] - 0.03]
+
+                # get quaternion for ros. 为ros获取四元数
+                euler = rvec[0, 0, :]
+                tf_change = tf.transformations.quaternion_from_euler(
+                    euler[0], euler[1], euler[2]
+                )
+                print("tf_change:", tf_change)
+
+                # trans pose according [joint1] 
+                # 根据 [joint1] 变换姿势
+                self.br.sendTransform(
+                    xyz, tf_change, rospy.Time.now(), "basic_shapes", "joint6_flange"
+                )
+
+        # [x, y, z, -172, 3, -46.8]
+        cv.imshow("Image", cv_image)
+
+        cv.waitKey(3)
+        try:
+            pass
+        except CvBridgeError as e:
+            print(e)
+
+
+if __name__ == "__main__":
+    try:
+        rospy.init_node("detect_marker")
+        rospy.loginfo("Starting cv_bridge_test node")
+        ImageConverter()
+        rospy.spin()
+    except KeyboardInterrupt:
+        print("Shutting down cv_bridge_test node.")
+        cv.destroyAllWindows()
--- a/mecharm/mecharm/scripts/follow_and_pump.py
+++ b/mecharm/mecharm/scripts/follow_and_pump.py
@ -0,0 +1,197 @@
+#!/usr/bin/env python2
+# coding:utf-8
+import rospy
+from visualization_msgs.msg import Marker
+import time
+import os
+
+# Type of message to communicate with mycobot 
+# 与 mycobot 通信的消息类型
+from mycobot_communication.msg import MycobotSetAngles, MycobotSetCoords, MycobotPumpStatus
+
+
+rospy.init_node("gipper_subscriber", anonymous=True)
+
+# Control the topic of mycobot, followed by angle, coordinates, gripper 
+# 控制mycobot的话题，依次是角度、坐标、夹爪
+angle_pub = rospy.Publisher("mycobot/angles_goal",
+                            MycobotSetAngles, queue_size=5)
+coord_pub = rospy.Publisher("mycobot/coords_goal",
+                            MycobotSetCoords, queue_size=5)
+# Judging device: ttyUSB* is M5；ttyACM* is wio 
+# 判断设备：ttyUSB*为M5；ttyACM*为wio
+robot = os.popen("ls /dev/ttyAMA*").readline()
+
+if "dev" in robot:
+    Pin = [2, 5]
+else:
+    Pin = [20, 21]
+
+pump_pub = rospy.Publisher("mycobot/pump_status",
+                           MycobotPumpStatus, queue_size=5)
+
+# Instantiate the message object. 实例化消息对象
+angles = MycobotSetAngles()
+coords = MycobotSetCoords()
+pump = MycobotPumpStatus()
+
+# Deviation value from the real position of mycobot 
+# 与mycobot真实位置的偏差值
+x_offset = -20
+y_offset = 20
+z_offset = 110
+
+# With this variable limit, the fetching behavior is only done once
+#  使用此变量限制，抓取行为仅执行一次
+flag = False
+
+# In order to compare whether the QR code moves later 
+# 为了比较二维码后面是否移动
+temp_x = temp_y = temp_z = 0.0
+
+temp_time = time.time()
+
+
+def pub_coords(x, y, z, rx=-150, ry=10, rz=-90, sp=70, m=2):
+    """Post coordinates 发布坐标"""
+    coords.x = x
+    coords.y = y
+    coords.z = z
+    coords.rx = rx
+    coords.ry = ry
+    coords.rz = rz
+    coords.speed = 70
+    coords.model = m
+    # print(coords)
+    coord_pub.publish(coords)
+
+
+def pub_angles(a, b, c, d, e, f, sp):
+    """Publishing angle. 发布角度"""
+    angles.joint_1 = float(a)
+    angles.joint_2 = float(b)
+    angles.joint_3 = float(c)
+    angles.joint_4 = float(d)
+    angles.joint_5 = float(e)
+    angles.joint_6 = float(f)
+    angles.speed = sp
+    angle_pub.publish(angles)
+
+
+def pub_pump(flag, Pin):
+    """Publish gripper status. 发布夹爪状态"""
+    pump.Status = flag
+    pump.Pin1 = Pin[0]
+    pump.Pin2 = Pin[1]
+    pump_pub.publish(pump)
+
+
+def target_is_moving(x, y, z):
+    """Determine whether the target moves. 判断目标是否移动"""
+    count = 0
+    for o, n in zip((x, y, z), (temp_x, temp_y, temp_z)):
+        print(o, n)
+        if abs(o - n) < 2:
+            count += 1
+    print(count)
+    if count == 3:
+        return False
+    return True
+
+
+def grippercallback(data):
+    """callback function. 回调函数"""
+    global flag, temp_x, temp_y, temp_z
+    # rospy.loginfo('gripper_subscriber get date :%s', data)
+    if flag:
+        return
+
+    # Parse out the coordinate value. 解析出坐标值
+    # pump length: 88mm
+    x = float(format(data.pose.position.x * 1000, ".2f"))
+    y = float(format(data.pose.position.y * 1000, ".2f"))
+    z = float(format(data.pose.position.z * 1000, ".2f"))
+
+    # When the running time is less than 30s, or the target position is still changing, perform tracking behavior
+    # 当运行时间小于 30s，或目标位置还在改变时，进行追踪行为
+    if (
+        time.time() - temp_time < 30
+        or (temp_x == temp_y == temp_z == 0.0)
+        or target_is_moving(x - x_offset, y - y_offset, z)
+    ):
+
+        x -= x_offset
+        y -= y_offset
+        pub_coords(x - 20, y, 280)
+        time.sleep(0.1)
+
+        temp_x, temp_y, temp_z = x, y, z
+        return
+    else:  # Indicates that the target is in a stationary state and can be attempted to grab. 表示目标处于静止状态，可以尝试抓取
+
+        print(x, y, z)
+
+        # detect heigth + pump height + limit height + offset
+        x += x_offset
+        y += y_offset
+        z = z + 88 + z_offset
+
+        pub_coords(x, y, z)
+        time.sleep(2.5)
+
+        # down
+        for i in range(1, 17):
+            pub_coords(x, y, z - i * 5, rx=-160, sp=10)
+            time.sleep(0.1)
+
+        time.sleep(2)
+
+        pub_pump(True, Pin)
+        # pump on
+
+        pub_coords(x, y, z + 20, -165)
+        time.sleep(1.5)
+
+        pub_angles(0, 30, -50, -40, 0, 0, 50)
+        time.sleep(1.5)
+
+        put_z = 140
+        pub_coords(39.4, -174.7, put_z, -177.13, -4.13, -152.59, 70, 2)
+        time.sleep(1.5)
+
+        for i in range(1, 8):
+            pub_coords(39.4, -174.7, put_z - i * 5, -
+                       177.13, -4.13, -152.59, 15, 2)
+            time.sleep(0.1)
+
+        pub_pump(False, Pin)
+
+        time.sleep(0.5)
+
+        pub_angles(0, 30, -50, -40, 0, 0, 50)
+        time.sleep(1.5)
+
+        # finally
+        flag = True
+
+
+def main():
+    for _ in range(10):
+        # pub_coords(150, 20, 220, -175, 0, -90, 70, 2)
+        pub_angles(0, 30, -50, -40, 0, 0, 50)
+        # pub_angles(random.randint(-30, 30), random.randint(-30, 30), random.randint(-30, 30), random.randint(-30, 30), random.randint(-30, 30), random.randint(-30, 30), 70)
+        time.sleep(0.5)
+
+    pub_pump(False, Pin)
+    # time.sleep(2.5)
+
+    # subscribers to mark information, mark信息的订阅者
+    rospy.Subscriber("visualization_marker", Marker,
+                     grippercallback, queue_size=1)
+
+    print("gripper test")
+    rospy.spin()
+
+
+if __name__ == "__main__":
+    main()
--- a/mecharm/mecharm/scripts/follow_display.py
+++ b/mecharm/mecharm/scripts/follow_display.py
@ -0,0 +1,111 @@
+#!/usr/bin/env python2
+# -*- coding:utf-8 -*-
+import time
+
+import rospy
+from sensor_msgs.msg import JointState
+from std_msgs.msg import Header
+from visualization_msgs.msg import Marker
+
+
+from pymycobot.mycobot import MyCobot
+
+
+def talker():
+    rospy.init_node("display", anonymous=True)
+
+    print("Try connect real mecharm...")
+    port = rospy.get_param("~port", "/dev/ttyUSB0")
+    baud = rospy.get_param("~baud", 115200)
+    print("port: {}, baud: {}\n".format(port, baud))
+    try:
+        mycobot = MyCobot(port, baud)
+    except Exception as e:
+        print(e)
+        print(
+            """\
+            \rTry connect mecharm failed!
+            \rPlease check wether connected with MyCobot.
+            \rPlease chckt wether the port or baud is right.
+        """
+        )
+        exit(1)
+    mycobot.release_all_servos()
+    time.sleep(0.1)
+    print("Rlease all servos over.\n")
+
+    pub = rospy.Publisher("joint_states", JointState, queue_size=10)
+    pub_marker = rospy.Publisher("visualization_marker", Marker, queue_size=10)
+    rate = rospy.Rate(30)  # 30hz
+
+    # pub joint state. 发布关节状态
+    joint_state_send = JointState()
+    joint_state_send.header = Header()
+
+    joint_state_send.name = [
+
+        "joint1_to_base",
+        "joint2_to_joint1",
+        "joint3_to_joint2",
+        "joint4_to_joint3",
+        "joint5_to_joint4",
+        "joint6_to_joint5",
+    ]
+    joint_state_send.velocity = [0]
+    joint_state_send.effort = []
+
+    marker_ = Marker()
+    marker_.header.frame_id = "/base"
+    marker_.ns = "my_namespace"
+
+    print("publishing ...")
+    while not rospy.is_shutdown():
+        joint_state_send.header.stamp = rospy.Time.now()
+
+        angles = mycobot.get_radians()
+        data_list = []
+        for index, value in enumerate(angles):
+            data_list.append(value)
+
+        # rospy.loginfo('{}'.format(data_list))
+        joint_state_send.position = data_list
+        
+        # data_list.insert(3,0.0)
+        print(joint_state_send.position)
+
+        pub.publish(joint_state_send)
+
+        coords = mycobot.get_coords()
+
+        # marker
+        marker_.header.stamp = rospy.Time.now()
+        marker_.type = marker_.SPHERE
+        marker_.action = marker_.ADD
+        marker_.scale.x = 0.04
+        marker_.scale.y = 0.04
+        marker_.scale.z = 0.04
+
+        # marker position initial. 标记初始位置
+        # print(coords)
+        if not coords:
+            # coords = [0, 0, 0, 0, 0 ]
+            coords = [0, 0, 0, 0, 0, 0]
+
+            rospy.loginfo("error [101]: can not get coord values")
+
+        marker_.pose.position.x = coords[1] / 1000 * -1
+        marker_.pose.position.y = coords[0] / 1000
+        marker_.pose.position.z = coords[2] / 1000
+
+        marker_.color.a = 1.0
+        marker_.color.g = 1.0
+        pub_marker.publish(marker_)
+
+        rate.sleep()
+
+
+if __name__ == "__main__":
+    try:
+        talker()
+    except rospy.ROSInterruptException:
+        pass
--- a/mecharm/mecharm/scripts/following_marker.py
+++ b/mecharm/mecharm/scripts/following_marker.py
@ -0,0 +1,65 @@
+#!/usr/bin/env python2
+# -*- coding:utf-8 -*-
+import time
+
+import rospy
+from sensor_msgs.msg import JointState
+from std_msgs.msg import Header
+from visualization_msgs.msg import Marker
+import tf
+
+
+def talker():
+    rospy.init_node("following_marker", anonymous=True)
+
+    pub_marker = rospy.Publisher("visualization_marker", Marker, queue_size=10)
+    rate = rospy.Rate(20)
+
+    listener = tf.TransformListener()
+
+    marker_ = Marker()
+    marker_.header.frame_id = "/joint1"
+    marker_.ns = "basic_cube"
+
+    print("publishing ...")
+    while not rospy.is_shutdown():
+        now = rospy.Time.now() - rospy.Duration(0.1)
+
+        try:
+            trans, rot = listener.lookupTransform("joint1", "basic_shapes", now)
+        except Exception as e:
+            print(e)
+            continue
+
+        print(type(trans), trans)
+        print(type(rot), rot)
+
+        # marker 标记
+        marker_.header.stamp = now
+        marker_.type = marker_.CUBE
+        marker_.action = marker_.ADD
+        marker_.scale.x = 0.04
+        marker_.scale.y = 0.04
+        marker_.scale.z = 0.04
+
+        # marker position initial. 标记初始位置
+        marker_.pose.position.x = trans[0]
+        marker_.pose.position.y = trans[1]
+        marker_.pose.position.z = trans[2]
+        marker_.pose.orientation.x = rot[0]
+        marker_.pose.orientation.y = rot[1]
+        marker_.pose.orientation.z = rot[2]
+        marker_.pose.orientation.w = rot[3]
+
+        marker_.color.a = 1.0
+        marker_.color.g = 1.0
+        pub_marker.publish(marker_)
+
+        rate.sleep()
+
+
+if __name__ == "__main__":
+    try:
+        talker()
+    except rospy.ROSInterruptException:
+        pass
--- a/mecharm/mecharm/scripts/listen_real.py
+++ b/mecharm/mecharm/scripts/listen_real.py
@ -0,0 +1,68 @@
+#!/usr/bin/env python2
+# -*- coding:utf-8 -*-
+# license removed for brevity
+import time
+import math
+
+import rospy
+from sensor_msgs.msg import JointState
+from std_msgs.msg import Header
+from mycobot_communication.srv import GetAngles
+
+
+def talker():
+    rospy.loginfo("start ...")
+    rospy.init_node("real_listener", anonymous=True)
+    pub = rospy.Publisher("joint_states", JointState, queue_size=10)
+    rate = rospy.Rate(30)  # 30hz
+
+    # pub joint state 发布关节状态
+    joint_state_send = JointState()
+    joint_state_send.header = Header()
+
+    joint_state_send.name = [
+        "joint1_to_base",
+        "joint2_to_joint1",
+        "joint3_to_joint2",
+        "joint4_to_joint3",
+        "joint5_to_joint4",
+        "joint6_to_joint5",
+    ]
+    joint_state_send.velocity = [0]
+    joint_state_send.effort = []
+
+    # waiting util server `get_joint_angles` enable.
+    rospy.loginfo("wait service")
+    rospy.wait_for_service("get_joint_angles")
+    func = rospy.ServiceProxy("get_joint_angles", GetAngles)
+
+    rospy.loginfo("start loop ...")
+    while not rospy.is_shutdown():
+        # get real angles from server.
+        #  从服务获取真实的角度
+        res = func()
+        if res.joint_1 == res.joint_2 == res.joint_3 == 0.0:
+            continue
+        radians_list = [
+            res.joint_1 * (math.pi / 180),
+            res.joint_2 * (math.pi / 180),
+            res.joint_3 * (math.pi / 180),
+            res.joint_4 * (math.pi / 180),
+            res.joint_5 * (math.pi / 180),
+            res.joint_6 * (math.pi / 180),
+
+        ]
+        rospy.loginfo("res: {}".format(radians_list))
+
+        # publish angles. 发布角度
+        joint_state_send.header.stamp = rospy.Time.now()
+        joint_state_send.position = radians_list
+        pub.publish(joint_state_send)
+        rate.sleep()
+
+
+if __name__ == "__main__":
+    try:
+        talker()
+    except rospy.ROSInterruptException:
+        pass
--- a/mecharm/mecharm/scripts/listen_real_of_topic.py
+++ b/mecharm/mecharm/scripts/listen_real_of_topic.py
@ -0,0 +1,67 @@
+#!/usr/bin/env python2
+# -*- coding:utf-8 -*-
+import math
+
+import rospy
+from sensor_msgs.msg import JointState
+from std_msgs.msg import Header
+from mycobot_communication.msg import MycobotAngles
+
+ 
+
+class Listener(object):
+    def __init__(self):
+        super(Listener, self).__init__()
+
+        rospy.loginfo("start ...")
+        rospy.init_node("real_listener_1", anonymous=True)
+        # init publisher. 初始化发布者
+        self.pub = rospy.Publisher("joint_states", JointState, queue_size=10)
+        # init subscriber. 初始化订阅者
+        self.sub = rospy.Subscriber("mycobot/angles_real", MycobotAngles, self.callback)
+        rospy.spin()
+
+    def callback(self, data):
+        """`mycobot/angles_real` subscriber callback method.
+
+        Args:
+            data (MycobotAngles): callback argument.
+        """
+        # ini publisher object.
+        #  初始化发布者对象
+        joint_state_send = JointState()
+        joint_state_send.header = Header()
+
+        joint_state_send.name = [
+            "joint1_to_base",
+            "joint2_to_joint1",
+            "joint3_to_joint2",
+            "joint4_to_joint3",
+            "joint5_to_joint4",
+            "joint6_to_joint5",
+            # "joint6output_to_joint6",
+        ]
+        joint_state_send.velocity = [0]
+        joint_state_send.effort = []
+        joint_state_send.header.stamp = rospy.Time.now()
+
+        # process callback data. 处理回调数据
+        radians_list = [
+            data.joint_1 * (math.pi / 180),
+            data.joint_2 * (math.pi / 180),
+            data.joint_3 * (math.pi / 180),
+            data.joint_4 * (math.pi / 180),
+            data.joint_5 * (math.pi / 180),
+            data.joint_6 * (math.pi / 180),
+        ]
+        rospy.loginfo("res: {}".format(radians_list))
+
+        joint_state_send.position = radians_list
+        self.pub.publish(joint_state_send)
+
+
+if __name__ == "__main__":
+    try:
+        Listener()
+    except rospy.ROSInterruptException:
+        pass
--- a/mecharm/mecharm/scripts/simple_gui.py
+++ b/mecharm/mecharm/scripts/simple_gui.py
@ -0,0 +1,478 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+import Tkinter as tk
+from mycobot_communication.srv import GetCoords, SetCoords, GetAngles, SetAngles, GripperStatus
+import rospy
+import time
+from rospy import ServiceException
+
+
+class Window:
+    def __init__(self, handle):
+        self.win = handle
+        self.win.resizable(0, 0)  # fixed window size，固定窗口大小
+
+        self.model = 0
+        self.speed = rospy.get_param("~speed", 50)
+
+        # set default speed，设置默认速度
+        self.speed_d = tk.StringVar()
+        self.speed_d.set(str(self.speed))
+        # print(self.speed)
+        self.connect_ser()
+
+        # Get the data of the robotic arm，获取机械臂数据
+        self.record_coords = [0, 0, 0, 0, 0, 0, self.speed, self.model]
+        self.res_angles = [0, 0, 0, 0, 0, 0, self.speed, self.model]
+        self.get_date()
+
+        # get screen width and height.获取屏幕宽度和高度
+        self.ws = self.win.winfo_screenwidth()  # width of the screen
+        self.hs = self.win.winfo_screenheight()  # height of the screen
+        # calculate x and y coordinates for the Tk root window
+        # 计算 Tk 根窗口的 x 和 y 坐标
+        x = (self.ws / 2) - 190
+        y = (self.hs / 2) - 250
+        self.win.geometry("430x400+{}+{}".format(x, y))
+        # layout,布局
+        self.set_layout()
+        # input section,输入部分
+        self.need_input()
+        # Show part,展示部分
+        self.show_init()
+
+        # Set the joint buttons 设置joint按钮
+        tk.Button(self.frmLT, text="设置", width=5, command=self.get_joint_input).grid(
+            row=6, column=1, sticky="w", padx=3, pady=2
+        )
+
+        # coordination settings button,coordination 设置按钮
+        tk.Button(self.frmRT, text="设置", width=5, command=self.get_coord_input).grid(
+            row=6, column=1, sticky="w", padx=3, pady=2
+        )
+
+        # Gripper switch button,夹爪开关按钮
+        tk.Button(self.frmLB, text="夹爪(开)", command=self.gripper_open, width=5).grid(
+            row=1, column=0, sticky="w", padx=3, pady=50
+        )
+        tk.Button(self.frmLB, text="夹爪(关)", command=self.gripper_close, width=5).grid(
+            row=1, column=1, sticky="w", padx=3, pady=2
+        )
+
+    def connect_ser(self):
+        rospy.init_node("simple_gui", anonymous=True, disable_signals=True)
+
+        rospy.wait_for_service("get_joint_angles")
+        rospy.wait_for_service("set_joint_angles")
+        rospy.wait_for_service("get_joint_coords")
+        rospy.wait_for_service("set_joint_coords")
+        rospy.wait_for_service("switch_gripper_status")
+        try:
+            self.get_coords = rospy.ServiceProxy("get_joint_coords", GetCoords)
+            self.set_coords = rospy.ServiceProxy("set_joint_coords", SetCoords)
+            self.get_angles = rospy.ServiceProxy("get_joint_angles", GetAngles)
+            self.set_angles = rospy.ServiceProxy("set_joint_angles", SetAngles)
+            self.switch_gripper = rospy.ServiceProxy(
+                "switch_gripper_status", GripperStatus
+            )
+        except:
+            print("start error ...")
+            exit(1)
+
+        print("Connect service success.")
+
+    def set_layout(self):
+        self.frmLT = tk.Frame(width=200, height=200)
+        self.frmLC = tk.Frame(width=200, height=200)
+        self.frmLB = tk.Frame(width=200, height=200)
+        self.frmRT = tk.Frame(width=200, height=200)
+        self.frmLT.grid(row=0, column=0, padx=1, pady=3)
+        self.frmLC.grid(row=1, column=0, padx=1, pady=3)
+        self.frmLB.grid(row=1, column=1, padx=2, pady=3)
+        self.frmRT.grid(row=0, column=1, padx=2, pady=3)
+
+    def need_input(self):
+        # input hint,输入提示
+        tk.Label(self.frmLT, text="Joint 1 ").grid(row=0)
+        tk.Label(self.frmLT, text="Joint 2 ").grid(row=1)  # the second row,第二行
+        tk.Label(self.frmLT, text="Joint 3 ").grid(row=2)
+        tk.Label(self.frmLT, text="Joint 4 ").grid(row=3)
+        tk.Label(self.frmLT, text="Joint 5 ").grid(row=4)
+        tk.Label(self.frmLT, text="Joint 6 ").grid(row=5)
+
+        tk.Label(self.frmRT, text=" x ").grid(row=0)
+        tk.Label(self.frmRT, text=" y ").grid(row=1)  # the second row,第二行
+        tk.Label(self.frmRT, text=" z ").grid(row=2)
+        tk.Label(self.frmRT, text=" rx ").grid(row=3)
+        tk.Label(self.frmRT, text=" ry ").grid(row=4)
+        tk.Label(self.frmRT, text=" rz ").grid(row=5)
+
+        # Set the default value of the input box,设置输入框的默认值
+        self.j1_default = tk.StringVar()
+        self.j1_default.set(self.res_angles[0])
+        self.j2_default = tk.StringVar()
+        self.j2_default.set(self.res_angles[1])
+        self.j3_default = tk.StringVar()
+        self.j3_default.set(self.res_angles[2])
+        self.j4_default = tk.StringVar()
+        self.j4_default.set(self.res_angles[3])
+        self.j5_default = tk.StringVar()
+        self.j5_default.set(self.res_angles[4])
+        self.j6_default = tk.StringVar()
+        self.j6_default.set(self.res_angles[5])
+
+        self.x_default = tk.StringVar()
+        self.x_default.set(self.record_coords[0])
+        self.y_default = tk.StringVar()
+        self.y_default.set(self.record_coords[1])
+        self.z_default = tk.StringVar()
+        self.z_default.set(self.record_coords[2])
+        self.rx_default = tk.StringVar()
+        self.rx_default.set(self.record_coords[3])
+        self.ry_default = tk.StringVar()
+        self.ry_default.set(self.record_coords[4])
+        self.rz_default = tk.StringVar()
+        self.rz_default.set(self.record_coords[5])
+
+        # joint input box,joint 输入框
+        self.J_1 = tk.Entry(self.frmLT, textvariable=self.j1_default)
+        self.J_1.grid(row=0, column=1, pady=3)
+        self.J_2 = tk.Entry(self.frmLT, textvariable=self.j2_default)
+        self.J_2.grid(row=1, column=1, pady=3)
+        self.J_3 = tk.Entry(self.frmLT, textvariable=self.j3_default)
+        self.J_3.grid(row=2, column=1, pady=3)
+        self.J_4 = tk.Entry(self.frmLT, textvariable=self.j4_default)
+        self.J_4.grid(row=3, column=1, pady=3)
+        self.J_5 = tk.Entry(self.frmLT, textvariable=self.j5_default)
+        self.J_5.grid(row=4, column=1, pady=3)
+        self.J_6 = tk.Entry(self.frmLT, textvariable=self.j6_default)
+        self.J_6.grid(row=5, column=1, pady=3)
+
+        # coord input box,coord 输入框
+        self.x = tk.Entry(self.frmRT, textvariable=self.x_default)
+        self.x.grid(row=0, column=1, pady=3, padx=0)
+        self.y = tk.Entry(self.frmRT, textvariable=self.y_default)
+        self.y.grid(row=1, column=1, pady=3)
+        self.z = tk.Entry(self.frmRT, textvariable=self.z_default)
+        self.z.grid(row=2, column=1, pady=3)
+        self.rx = tk.Entry(self.frmRT, textvariable=self.rx_default)
+        self.rx.grid(row=3, column=1, pady=3)
+        self.ry = tk.Entry(self.frmRT, textvariable=self.ry_default)
+        self.ry.grid(row=4, column=1, pady=3)
+        self.rz = tk.Entry(self.frmRT, textvariable=self.rz_default)
+        self.rz.grid(row=5, column=1, pady=3)
+
+        # All input boxes, used to get the input data,所有输入框，用于拿输入的数据
+        self.all_j = [self.J_1, self.J_2, self.J_3, self.J_4, self.J_5, self.J_6]
+        self.all_c = [self.x, self.y, self.z, self.rx, self.ry, self.rz]
+
+        # speed input box,速度输入框
+        tk.Label(
+            self.frmLB,
+            text="speed",
+        ).grid(row=0, column=0)
+        self.get_speed = tk.Entry(self.frmLB, textvariable=self.speed_d, width=10)
+        self.get_speed.grid(row=0, column=1)
+
+    def show_init(self):
+        # show,显示
+        tk.Label(self.frmLC, text="Joint 1 ").grid(row=0)
+        tk.Label(self.frmLC, text="Joint 2 ").grid(row=1)  # the second row,第二行
+        tk.Label(self.frmLC, text="Joint 3 ").grid(row=2)
+        tk.Label(self.frmLC, text="Joint 4 ").grid(row=3)
+        tk.Label(self.frmLC, text="Joint 5 ").grid(row=4)
+        tk.Label(self.frmLC, text="Joint 6 ").grid(row=5)
+
+        # get数据
+
+        # show,展示出来
+        self.cont_1 = tk.StringVar(self.frmLC)
+        self.cont_1.set(str(self.res_angles[0]) + "°")
+        self.cont_2 = tk.StringVar(self.frmLC)
+        self.cont_2.set(str(self.res_angles[1]) + "°")
+        self.cont_3 = tk.StringVar(self.frmLC)
+        self.cont_3.set(str(self.res_angles[2]) + "°")
+        self.cont_4 = tk.StringVar(self.frmLC)
+        self.cont_4.set(str(self.res_angles[3]) + "°")
+        self.cont_5 = tk.StringVar(self.frmLC)
+        self.cont_5.set(str(self.res_angles[4]) + "°")
+        self.cont_6 = tk.StringVar(self.frmLC)
+        self.cont_6.set(str(self.res_angles[5]) + "°")
+        self.cont_all = [
+            self.cont_1,
+            self.cont_2,
+            self.cont_3,
+            self.cont_4,
+            self.cont_5,
+            self.cont_6,
+            self.speed,
+            self.model,
+        ]
+
+        self.show_j1 = tk.Label(
+            self.frmLC,
+            textvariable=self.cont_1,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=0, column=1, padx=0, pady=5)
+
+        self.show_j2 = tk.Label(
+            self.frmLC,
+            textvariable=self.cont_2,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=1, column=1, padx=0, pady=5)
+        self.show_j3 = tk.Label(
+            self.frmLC,
+            textvariable=self.cont_3,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=2, column=1, padx=0, pady=5)
+        self.show_j4 = tk.Label(
+            self.frmLC,
+            textvariable=self.cont_4,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=3, column=1, padx=0, pady=5)
+        self.show_j5 = tk.Label(
+            self.frmLC,
+            textvariable=self.cont_5,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=4, column=1, padx=0, pady=5)
+        self.show_j6 = tk.Label(
+            self.frmLC,
+            textvariable=self.cont_6,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=5, column=1, padx=5, pady=5)
+
+        self.all_jo = [
+            self.show_j1,
+            self.show_j2,
+            self.show_j3,
+            self.show_j4,
+            self.show_j5,
+            self.show_j6,
+        ]
+
+        # show,显示
+        tk.Label(self.frmLC, text="  x ").grid(row=0, column=3)
+        tk.Label(self.frmLC, text="  y ").grid(row=1, column=3)  
+        tk.Label(self.frmLC, text="  z ").grid(row=2, column=3)
+        tk.Label(self.frmLC, text="  rx ").grid(row=3, column=3)
+        tk.Label(self.frmLC, text="  ry ").grid(row=4, column=3)
+        tk.Label(self.frmLC, text="  rz ").grid(row=5, column=3)
+        self.coord_x = tk.StringVar()
+        self.coord_x.set(str(self.record_coords[0]))
+        self.coord_y = tk.StringVar()
+        self.coord_y.set(str(self.record_coords[1]))
+        self.coord_z = tk.StringVar()
+        self.coord_z.set(str(self.record_coords[2]))
+        self.coord_rx = tk.StringVar()
+        self.coord_rx.set(str(self.record_coords[3]))
+        self.coord_ry = tk.StringVar()
+        self.coord_ry.set(str(self.record_coords[4]))
+        self.coord_rz = tk.StringVar()
+        self.coord_rz.set(str(self.record_coords[5]))
+
+        self.coord_all = [
+            self.coord_x,
+            self.coord_y,
+            self.coord_z,
+            self.coord_rx,
+            self.coord_ry,
+            self.coord_rz,
+            self.speed,
+            self.model,
+        ]
+
+        self.show_x = tk.Label(
+            self.frmLC,
+            textvariable=self.coord_x,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=0, column=4, padx=5, pady=5)
+        self.show_y = tk.Label(
+            self.frmLC,
+            textvariable=self.coord_y,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=1, column=4, padx=5, pady=5)
+        self.show_z = tk.Label(
+            self.frmLC,
+            textvariable=self.coord_z,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=2, column=4, padx=5, pady=5)
+        self.show_rx = tk.Label(
+            self.frmLC,
+            textvariable=self.coord_rx,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=3, column=4, padx=5, pady=5)
+        self.show_ry = tk.Label(
+            self.frmLC,
+            textvariable=self.coord_ry,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=4, column=4, padx=5, pady=5)
+        self.show_rz = tk.Label(
+            self.frmLC,
+            textvariable=self.coord_rz,
+            font=("Arial", 9),
+            width=7,
+            height=1,
+            bg="white",
+        ).grid(row=5, column=4, padx=5, pady=5)
+
+        # mm， Unit show，单位展示
+        self.unit = tk.StringVar()
+        self.unit.set("mm")
+        for i in range(6):
+            tk.Label(self.frmLC, textvariable=self.unit, font=("Arial", 9)).grid(
+                row=i, column=5
+            )
+
+    def gripper_open(self):
+        try:
+            self.switch_gripper(True)
+        except ServiceException:
+            # Probably because the method has no return value, the service throws an unhandled error
+            # 可能由于该方法没有返回值，服务抛出无法处理的错误
+            pass
+
+    def gripper_close(self):
+        try:
+            self.switch_gripper(False)
+        except ServiceException:
+            pass
+
+    def get_coord_input(self):
+        # Get the data input by coord and send it to the robotic arm
+        # 获取 coord 输入的数据，发送给机械臂
+        c_value = []
+        for i in self.all_c:
+            # print(type(i.get()))
+            c_value.append(float(i.get()))
+        self.speed = (
+            int(float(self.get_speed.get())) if self.get_speed.get() else self.speed
+        )
+        c_value.append(self.speed)
+        c_value.append(self.model)
+        # print(c_value)
+        try:
+            self.set_coords(*c_value)
+        except ServiceException:
+            pass
+        self.show_j_date(c_value[:-2], "coord")
+
+    def get_joint_input(self):
+        # Get the data input by the joint and send it to the robotic arm
+        # 获取joint输入的数据，发送给机械臂
+        j_value = []
+        for i in self.all_j:
+            # print(type(i.get()))
+            j_value.append(float(i.get()))
+        self.speed = (
+            int(float(self.get_speed.get())) if self.get_speed.get() else self.speed
+        )
+        j_value.append(self.speed)
+
+        try:
+            self.set_angles(*j_value)
+        except ServiceException:
+            pass
+        self.show_j_date(j_value[:-1])
+        # return j_value,c_value,speed
+
+    def get_date(self):
+        # Take the data of the robotic arm for display.拿机械臂的数据，用于展示
+        t = time.time()
+        while time.time() - t < 2:
+            self.res = self.get_coords()
+            if self.res.x > 1:
+                break
+            time.sleep(0.1)
+
+        t = time.time()
+        while time.time() - t < 2:
+            self.angles = self.get_angles()
+            if self.angles.joint_1 > 1:
+                break
+            time.sleep(0.1)
+        # print(self.angles.joint_1)
+        self.record_coords = [
+            round(self.res.x, 2),
+            round(self.res.y, 2),
+            round(self.res.z, 2),
+            round(self.res.rx, 2),
+            round(self.res.ry, 2),
+            round(self.res.rz, 2),
+            self.speed,
+            self.model,
+        ]
+        self.res_angles = [
+            round(self.angles.joint_1, 2),
+            round(self.angles.joint_2, 2),
+            round(self.angles.joint_3, 2),
+            round(self.angles.joint_4, 2),
+            round(self.angles.joint_5, 2),
+            round(self.angles.joint_6, 2),
+        ]
+        # print('coord:',self.record_coords)
+        # print('angles:',self.res_angles)
+
+    # def send_input(self,dates):
+    def show_j_date(self, date, way=""):
+        # Show data,展示数据
+        if way == "coord":
+            for i, j in zip(date, self.coord_all):
+                # print(i)
+                j.set(str(i))
+        else:
+            for i, j in zip(date, self.cont_all):
+                j.set(str(i) + "°")
+
+    def run(self):
+        while True:
+            try:
+                self.win.update()
+                time.sleep(0.001)
+            except tk.TclError as e:
+                if "application has been destroyed" in str(e):
+                    break
+                else:
+                    raise
+
+
+def main():
+    window = tk.Tk()
+    window.title("mycobot ros GUI")
+    Window(window).run()
+
+
+if __name__ == "__main__":
+    main()
--- a/mecharm/mecharm/scripts/slider_control.py
+++ b/mecharm/mecharm/scripts/slider_control.py
@ -0,0 +1,52 @@
+#!/usr/bin/env python2
+# -*- coding:utf-8 -*-
+
+"""[summary]
+This file obtains the joint angle of the manipulator in ROS,
+and then sends it directly to the real manipulator using `pymycobot` API.
+This file is [slider_control.launch] related script.
+Passable parameters:
+    port: serial prot string. Defaults is '/dev/ttyUSB0'
+    baud: serial prot baudrate. Defaults is 115200.
+"""
+
+import rospy
+from sensor_msgs.msg import JointState
+
+from pymycobot.mycobot import MyCobot
+
+
+
+mc = None
+
+
+def callback(data):
+    # rospy.loginfo(rospy.get_caller_id() + "%s", data.position)
+    print(data.position)
+    data_list = []
+    for index, value in enumerate(data.position):
+        data_list.append(value)
+
+    # print(data_list)
+    mc.send_radians(data_list, 80)
+    # time.sleep(0.5)
+
+
+def listener():
+    global mc
+    rospy.init_node("control_slider", anonymous=True)
+
+    rospy.Subscriber("joint_states", JointState, callback)
+    port = rospy.get_param("~port", "/dev/ttyUSB0") # Select connected device. 选择连接设备
+    baud = rospy.get_param("~baud", 115200)
+    print(port, baud)
+    mc = MyCobot(port, baud)
+
+    # spin() simply keeps python from exiting until this node is stopped
+    # spin() 只是阻止python退出，直到该节点停止
+    print("spin ...")
+    rospy.spin()
+
+
+if __name__ == "__main__":
+    listener()
--- a/mecharm/mecharm/scripts/teleop_keyboard.py
+++ b/mecharm/mecharm/scripts/teleop_keyboard.py
@ -0,0 +1,180 @@
+#!/usr/bin/env python
+# -*- coding:utf-8 -*-
+from __future__ import print_function
+from mycobot_communication.srv import GetCoords, SetCoords, GetAngles, SetAngles, GripperStatus
+import rospy
+import sys
+import select
+import termios
+import tty
+import time
+
+import roslib
+
+# Terminal output prompt information. 终端输出提示信息
+msg = """\
+MyCobot Teleop Keyboard Controller
+---------------------------
+Movimg options(control coordinations [x,y,z,rx,ry,rz]):
+              w(x+)
+
+    a(y-)     s(x-)     d(y+)
+
+    z(z-) x(z+)
+
+u(rx+)   i(ry+)   o(rz+)
+j(rx-)   k(ry-)   l(rz-)
+   
+
+Gripper control:
+    g - open
+    h - close
+
+Other:
+    1 - Go to init pose
+    2 - Go to home pose
+    3 - Resave home pose
+    q - Quit
+"""
+
+
+def vels(speed, turn):
+    return "currently:\tspeed: %s\tchange percent: %s  " % (speed, turn)
+
+
+class Raw(object):
+    def __init__(self, stream):
+        self.stream = stream
+        self.fd = self.stream.fileno()
+
+    def __enter__(self):
+        self.original_stty = termios.tcgetattr(self.stream)
+        tty.setcbreak(self.stream)
+
+    def __exit__(self, type, value, traceback):
+        termios.tcsetattr(self.stream, termios.TCSANOW, self.original_stty)
+
+
+def teleop_keyboard():
+    rospy.init_node("teleop_keyboard")
+
+    model = 0
+    speed = rospy.get_param("~speed", 40)
+    change_percent = rospy.get_param("~change_percent", 5)
+
+    change_angle = 180 * change_percent / 100
+    change_len = 250 * change_percent / 100
+
+    rospy.wait_for_service("get_joint_angles")
+    rospy.wait_for_service("set_joint_angles")
+    rospy.wait_for_service("get_joint_coords")
+    rospy.wait_for_service("set_joint_coords")
+    rospy.wait_for_service("switch_gripper_status")
+    print("service ready.")
+    try:
+        get_coords = rospy.ServiceProxy("get_joint_coords", GetCoords)
+        set_coords = rospy.ServiceProxy("set_joint_coords", SetCoords)
+        get_angles = rospy.ServiceProxy("get_joint_angles", GetAngles)
+        set_angles = rospy.ServiceProxy("set_joint_angles", SetAngles)
+        switch_gripper = rospy.ServiceProxy(
+            "switch_gripper_status", GripperStatus)
+    except:
+        print("start error ...")
+        exit(1)
+
+
+    init_pose = [0, 0, 0, 0, 0, 0, speed]
+    home_pose = [0, 8, -127, 40, 0, 0, speed]
+
+    # rsp = set_angles(*init_pose)
+
+    while True:
+        res = get_coords()
+        if res.x > 1:
+            break
+        time.sleep(0.1)
+
+    record_coords = [res.x, res.y, res.z, res.rx, res.ry, res.rz, speed, model]
+
+    print(record_coords)
+
+    try:
+        print(msg)
+        print(vels(speed, change_percent))
+        # Keyboard keys call different motion functions. 键盘按键调用不同的运动功能
+        while 1:
+            try:
+                # print("\r current coords: %s" % record_coords, end="")
+                with Raw(sys.stdin):
+                    key = sys.stdin.read(1)
+                if key == "q":
+                    break
+                elif key in ["w", "W"]:
+                    record_coords[0] += change_len
+                    set_coords(*record_coords)
+                elif key in ["s", "S"]:
+                    record_coords[0] -= change_len
+                    set_coords(*record_coords)
+                elif key in ["a", "A"]:
+                    record_coords[1] -= change_len
+                    set_coords(*record_coords)
+                elif key in ["d", "D"]:
+                    record_coords[1] += change_len
+                    set_coords(*record_coords)
+                elif key in ["z", "Z"]:
+                    record_coords[2] -= change_len
+                    set_coords(*record_coords)
+                elif key in ["x", "X"]:
+                    record_coords[2] += change_len
+                    set_coords(*record_coords)
+                elif key in ["u", "U"]:
+                    record_coords[3] += change_angle
+                    set_coords(*record_coords)
+                elif key in ["j", "J"]:
+                    record_coords[3] -= change_angle
+                    set_coords(*record_coords)
+                elif key in ["i", "I"]:
+                    record_coords[4] += change_angle
+                    set_coords(*record_coords)
+                elif key in ["k", "K"]:
+                    record_coords[4] -= change_angle
+                    set_coords(*record_coords)
+                elif key in ["o", "O"]:
+                    record_coords[5] += change_angle
+                    set_coords(*record_coords)
+                elif key in ["l", "L"]:
+                    record_coords[5] -= change_angle
+                    set_coords(*record_coords)
+                elif key in ["g", "G"]:
+                    switch_gripper(True)
+                elif key in ["h", "H"]:
+                    switch_gripper(False)
+                elif key == "1":
+                    rsp = set_angles(*init_pose)
+                    record_coords = [res.x, res.y, res.z, res.rx, res.ry, res.rz, speed, model]
+                elif key in "2":
+                    rsp = set_angles(*home_pose)
+                    record_coords = [res.x, res.y, res.z, res.rx, res.ry, res.rz, speed, model]
+                elif key in "3":
+                    rep = get_angles()
+                    home_pose[0] = rep.joint_1
+                    home_pose[1] = rep.joint_2
+                    home_pose[2] = rep.joint_3
+                    home_pose[3] = rep.joint_4
+                    home_pose[4] = rep.joint_5
+                else:
+                    continue
+
+            except Exception as e:
+                # print(e)
+                continue
+
+    except Exception as e:
+        print(e)
+
+
+if __name__ == "__main__":
+    try:
+        teleop_keyboard()
+    except rospy.ROSInterruptException:
+        pass
--- a/mecharm/mecharm_communication/launch/communication_service.launch
+++ b/mecharm/mecharm_communication/launch/communication_service.launch
@ -1,7 +1,7 @@
 <launch>
 	<!-- Select connecting device and serial port ，选择连接设备及串口-->
-	<arg name="port" default="/dev/ttyAMA0" />
-	<arg name="baud" default="1000000" />
+	<arg name="port" default="/dev/ttyUSB0" />
+	<arg name="baud" default="115200" />

 	<!-- Open communication service ，开启通讯服务-->
 	<node name="mecharm_services" pkg="mecharm_communication" type="mecharm_services.py" output="screen">
--- a/mecharm/mecharm_communication/scripts/mecharm_topics_pi.py
+++ b/mecharm/mecharm_communication/scripts/mecharm_topics_pi.py
@ -17,9 +17,9 @@ from mycobot_communication.msg import (
    MycobotPumpStatus,
 )

+from pymycobot import MyCobot

-
-from pymycobot import MyCobotSocket
+# from pymycobot import MyCobotSocket


 class Watcher:
@ -74,11 +74,12 @@ class MycobotTopics(object):
        rospy.init_node("mycobot_topics_pi")
        rospy.loginfo("start ...")
        # problem
-        port = rospy.get_param("~port", "/dev/ttyUSB0")
-        baud = rospy.get_param("~baud", 115200)
+        port = rospy.get_param("~port", "/dev/ttyAMA0")
+        baud = rospy.get_param("~baud", 1000000)
        rospy.loginfo("%s,%s" % (port, baud))
-        self.mc = MyCobotSocket(port, baud) # port
-        self.mc.connect()   #pi
+        # self.mc = MyCobotSocket(port, baud) # port
+        # self.mc.connect()   #pi
+        self.mc = MyCobot(port, baud)
        self.lock = threading.Lock()

    def start(self):
--- a/mecharm/mecharm_moveit/CMakeLists.txt
+++ b/mecharm/mecharm_moveit/CMakeLists.txt
@ -0,0 +1,22 @@
+cmake_minimum_required(VERSION 2.8.3)
+project(mecharm_moveit)
+
+find_package(catkin REQUIRED
+  rospy
+  std_msgs
+  moveit_msgs
+)
+
+catkin_package()
+
+## Mark executable scripts (Python etc.) for installation
+## in contrast to setup.py, you can choose the destination
+catkin_install_python(PROGRAMS
+  scripts/sync_plan.py
+  scripts/path_planning_and_obstacle_avoidance_demo.py
+  DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
+)
+
+install(DIRECTORY launch DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}
+  PATTERN "setup_assistant.launch" EXCLUDE)
+install(DIRECTORY config DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
--- a/mecharm/mecharm_moveit/LICENSE
+++ b/mecharm/mecharm_moveit/LICENSE
@ -0,0 +1,25 @@
+BSD 2-Clause License
+
+Copyright (c) 2020, Elephant Robotics
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--- a/mecharm/mecharm_moveit/config/chomp_planning.yaml
+++ b/mecharm/mecharm_moveit/config/chomp_planning.yaml
@ -0,0 +1,18 @@
+planning_time_limit: 10.0
+max_iterations: 200
+max_iterations_after_collision_free: 5
+smoothness_cost_weight: 0.1
+obstacle_cost_weight: 1.0
+learning_rate: 0.01
+smoothness_cost_velocity: 0.0
+smoothness_cost_acceleration: 1.0
+smoothness_cost_jerk: 0.0
+ridge_factor: 0.01
+use_pseudo_inverse: false
+pseudo_inverse_ridge_factor: 1e-4
+joint_update_limit: 0.1
+collision_clearence: 0.2
+collision_threshold: 0.07
+use_stochastic_descent: true
+enable_failure_recovery: true
+max_recovery_attempts: 5
--- a/mecharm/mecharm_moveit/config/fake_controllers.yaml
+++ b/mecharm/mecharm_moveit/config/fake_controllers.yaml
@ -0,0 +1,11 @@
+controller_list:
+  - name: fake_arm_group_controller
+    joints:
+      - joint1_to_base
+      - joint2_to_joint1
+      - joint3_to_joint2
+      - joint4_to_joint3
+      - joint5_to_joint4
+      - joint6_to_joint5
+      
+      # - joint6output_to_joint6
--- a/mecharm/mecharm_moveit/config/firefighter.srdf
+++ b/mecharm/mecharm_moveit/config/firefighter.srdf
@ -0,0 +1,50 @@
+<?xml version="1.0" ?>
+<!--This does not replace URDF, and is not an extension of URDF.
+    This is a format for representing semantic information about the robot structure.
+    A URDF file must exist for this robot as well, where the joints and the links that are referenced are defined
+-->
+<robot name="firefighter">
+    <!--GROUPS: Representation of a set of joints and links. This can be useful for specifying DOF to plan for, defining arms, end effectors, etc-->
+    <!--LINKS: When a link is specified, the parent joint of that link (if it exists) is automatically included-->
+    <!--JOINTS: When a joint is specified, the child link of that joint (which will always exist) is automatically included-->
+    <!--CHAINS: When a chain is specified, all the links along the chain (including endpoints) are included in the group. Additionally, all the joints that are parents to included links are also included. This means that joints along the chain and the parent joint of the base link are included in the group-->
+    <!--SUBGROUPS: Groups can also be formed by referencing to already defined group names-->
+    <group name="arm_group">
+        <joint name="joint1_to_base" />
+        <joint name="joint2_to_joint1" />
+        <joint name="joint3_to_joint2" />
+        <joint name="joint4_to_joint3" />
+        <joint name="joint5_to_joint4" />
+        <joint name="joint6_to_joint5" />
+        
+        <!-- <joint name="joint6output_to_joint6" /> -->
+    </group>
+    <!--GROUP STATES: Purpose: Define a named state for a particular group, in terms of joint values. This is useful to define states like 'folded arms'-->
+    <group_state name="init_pose" group="arm_group">
+        <joint name="joint1_to_base" value="0" />
+        <joint name="joint2_to_joint1" value="0" />
+        <joint name="joint3_to_joint2" value="0" />
+        <joint name="joint4_to_joint3" value="0" />
+        <joint name="joint5_to_joint4" value="0" />
+        <joint name="joint6_to_joint5" value="0" />
+        <!-- <joint name="joint6_to_joint5" value="0" />
+        <joint name="joint6output_to_joint6" value="0" /> -->
+    </group_state>
+    <!--VIRTUAL JOINT: Purpose: this element defines a virtual joint between a robot link and an external frame of reference (considered fixed with respect to the robot)-->
+    <!-- <virtual_joint name="vitual_joint" type="fixed" parent_frame="basic" child_link="joint1" /> -->
+    <virtual_joint name="vitual_joint" type="fixed" parent_frame="basic" child_link="base" />
+
+    <!--DISABLE COLLISIONS: By default it is assumed that any link of the robot could potentially come into collision with any other link in the robot. This tag disables collision checking between a specified pair of links. -->
+
+    <disable_collisions link1="base" link2="link1" reason="Adjacent" />
+    <disable_collisions link1="base" link2="link4" reason="Never" />
+    <disable_collisions link1="link1" link2="link2" reason="Adjacent" />
+    <disable_collisions link1="link1" link2="link4" reason="Never" />
+    <disable_collisions link1="link2" link2="link3" reason="Adjacent" />
+    <disable_collisions link1="link2" link2="link4" reason="Never" />
+    <disable_collisions link1="link3" link2="link4" reason="Adjacent" />
+    <disable_collisions link1="link4" link2="link5" reason="Adjacent" />
+    <disable_collisions link1="link4" link2="link6" reason="Never" />
+    <disable_collisions link1="link5" link2="link6" reason="Adjacent" />
+
+</robot>
--- a/mecharm/mecharm_moveit/config/joint_limits.yaml
+++ b/mecharm/mecharm_moveit/config/joint_limits.yaml
@ -0,0 +1,39 @@
+# joint_limits.yaml allows the dynamics properties specified in the URDF to be overwritten or augmented as needed
+# Specific joint properties can be changed with the keys [max_position, min_position, max_velocity, max_acceleration]
+# Joint limits can be turned off with [has_velocity_limits, has_acceleration_limits]
+joint_limits:
+  joint1_to_base:
+    has_velocity_limits: false
+    max_velocity: 0
+    has_acceleration_limits: false
+    max_acceleration: 0
+  joint2_to_joint1:
+    has_velocity_limits: false
+    max_velocity: 0
+    has_acceleration_limits: false
+    max_acceleration: 0
+  joint3_to_joint2:
+    has_velocity_limits: false
+    max_velocity: 0
+    has_acceleration_limits: false
+    max_acceleration: 0
+  joint4_to_joint3:
+    has_velocity_limits: false
+    max_velocity: 0
+    has_acceleration_limits: false
+    max_acceleration: 0
+  joint5_to_joint4:
+    has_velocity_limits: false
+    max_velocity: 0
+    has_acceleration_limits: false
+    max_acceleration: 0
+  joint6_to_joint5:
+    has_velocity_limits: false
+    max_velocity: 0
+    has_acceleration_limits: false
+    max_acceleration: 0
+  # joint6output_to_joint6:
+  #   has_velocity_limits: false
+  #   max_velocity: 0
+  #   has_acceleration_limits: false
+  #   max_acceleration: 0
--- a/mecharm/mecharm_moveit/config/kinematics.yaml
+++ b/mecharm/mecharm_moveit/config/kinematics.yaml
@ -0,0 +1,5 @@
+arm_group:
+  kinematics_solver: kdl_kinematics_plugin/KDLKinematicsPlugin
+  kinematics_solver_search_resolution: 0.005
+  kinematics_solver_timeout: 0.005
+  kinematics_solver_attempts: 3
--- a/mecharm/mecharm_moveit/config/ompl_planning.yaml
+++ b/mecharm/mecharm_moveit/config/ompl_planning.yaml
@ -0,0 +1,150 @@
+planner_configs:
+  SBL:
+    type: geometric::SBL
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+  EST:
+    type: geometric::EST
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0 setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05
+  LBKPIECE:
+    type: geometric::LBKPIECE
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    border_fraction: 0.9  # Fraction of time focused on boarder default: 0.9
+    min_valid_path_fraction: 0.5  # Accept partially valid moves above fraction. default: 0.5
+  BKPIECE:
+    type: geometric::BKPIECE
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    border_fraction: 0.9  # Fraction of time focused on boarder default: 0.9
+    failed_expansion_score_factor: 0.5  # When extending motion fails, scale score by factor. default: 0.5
+    min_valid_path_fraction: 0.5  # Accept partially valid moves above fraction. default: 0.5
+  KPIECE:
+    type: geometric::KPIECE
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05
+    border_fraction: 0.9  # Fraction of time focused on boarder default: 0.9 (0.0,1.]
+    failed_expansion_score_factor: 0.5  # When extending motion fails, scale score by factor. default: 0.5
+    min_valid_path_fraction: 0.5  # Accept partially valid moves above fraction. default: 0.5
+  RRT:
+    type: geometric::RRT
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability? default: 0.05
+  RRTConnect:
+    type: geometric::RRTConnect
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+  RRTstar:
+    type: geometric::RRTstar
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability? default: 0.05
+    delay_collision_checking: 1  # Stop collision checking as soon as C-free parent found. default 1
+  TRRT:
+    type: geometric::TRRT
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability? default: 0.05
+    max_states_failed: 10  # when to start increasing temp. default: 10
+    temp_change_factor: 2.0  # how much to increase or decrease temp. default: 2.0
+    min_temperature: 10e-10  # lower limit of temp change. default: 10e-10
+    init_temperature: 10e-6  # initial temperature. default: 10e-6
+    frountier_threshold: 0.0  # dist new state to nearest neighbor to disqualify as frontier. default: 0.0 set in setup()
+    frountierNodeRatio: 0.1  # 1/10, or 1 nonfrontier for every 10 frontier. default: 0.1
+    k_constant: 0.0  # value used to normalize expresssion. default: 0.0 set in setup()
+  PRM:
+    type: geometric::PRM
+    max_nearest_neighbors: 10  # use k nearest neighbors. default: 10
+  PRMstar:
+    type: geometric::PRMstar
+  FMT:
+    type: geometric::FMT
+    num_samples: 1000  # number of states that the planner should sample. default: 1000
+    radius_multiplier: 1.1  # multiplier used for the nearest neighbors search radius. default: 1.1
+    nearest_k: 1  # use Knearest strategy. default: 1
+    cache_cc: 1  # use collision checking cache. default: 1
+    heuristics: 0  # activate cost to go heuristics. default: 0
+    extended_fmt: 1  # activate the extended FMT*: adding new samples if planner does not finish successfully. default: 1
+  BFMT:
+    type: geometric::BFMT
+    num_samples: 1000  # number of states that the planner should sample. default: 1000
+    radius_multiplier: 1.0  # multiplier used for the nearest neighbors search radius. default: 1.0
+    nearest_k: 1  # use the Knearest strategy. default: 1
+    balanced: 0  # exploration strategy: balanced true expands one tree every iteration. False will select the tree with lowest maximum cost to go. default: 1
+    optimality: 1  # termination strategy: optimality true finishes when the best possible path is found. Otherwise, the algorithm will finish when the first feasible path is found. default: 1
+    heuristics: 1  # activates cost to go heuristics. default: 1
+    cache_cc: 1  # use the collision checking cache. default: 1
+    extended_fmt: 1  # Activates the extended FMT*: adding new samples if planner does not finish successfully. default: 1
+  PDST:
+    type: geometric::PDST
+  STRIDE:
+    type: geometric::STRIDE
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05
+    use_projected_distance: 0  # whether nearest neighbors are computed based on distances in a projection of the state rather distances in the state space itself. default: 0
+    degree: 16  # desired degree of a node in the Geometric Near-neightbor Access Tree (GNAT). default: 16
+    max_degree: 18  # max degree of a node in the GNAT. default: 12
+    min_degree: 12  # min degree of a node in the GNAT. default: 12
+    max_pts_per_leaf: 6  # max points per leaf in the GNAT. default: 6
+    estimated_dimension: 0.0  # estimated dimension of the free space. default: 0.0
+    min_valid_path_fraction: 0.2  # Accept partially valid moves above fraction. default: 0.2
+  BiTRRT:
+    type: geometric::BiTRRT
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    temp_change_factor: 0.1  # how much to increase or decrease temp. default: 0.1
+    init_temperature: 100  # initial temperature. default: 100
+    frountier_threshold: 0.0  # dist new state to nearest neighbor to disqualify as frontier. default: 0.0 set in setup()
+    frountier_node_ratio: 0.1  # 1/10, or 1 nonfrontier for every 10 frontier. default: 0.1
+    cost_threshold: 1e300  # the cost threshold. Any motion cost that is not better will not be expanded. default: inf
+  LBTRRT:
+    type: geometric::LBTRRT
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05
+    epsilon: 0.4  # optimality approximation factor. default: 0.4
+  BiEST:
+    type: geometric::BiEST
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+  ProjEST:
+    type: geometric::ProjEST
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+    goal_bias: 0.05  # When close to goal select goal, with this probability. default: 0.05
+  LazyPRM:
+    type: geometric::LazyPRM
+    range: 0.0  # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup()
+  LazyPRMstar:
+    type: geometric::LazyPRMstar
+  SPARS:
+    type: geometric::SPARS
+    stretch_factor: 3.0  # roadmap spanner stretch factor. multiplicative upper bound on path quality. It does not make sense to make this parameter more than 3. default: 3.0
+    sparse_delta_fraction: 0.25  # delta fraction for connection distance. This value represents the visibility range of sparse samples. default: 0.25
+    dense_delta_fraction: 0.001  # delta fraction for interface detection. default: 0.001
+    max_failures: 1000  # maximum consecutive failure limit. default: 1000
+  SPARStwo:
+    type: geometric::SPARStwo
+    stretch_factor: 3.0  # roadmap spanner stretch factor. multiplicative upper bound on path quality. It does not make sense to make this parameter more than 3. default: 3.0
+    sparse_delta_fraction: 0.25  # delta fraction for connection distance. This value represents the visibility range of sparse samples. default: 0.25
+    dense_delta_fraction: 0.001  # delta fraction for interface detection. default: 0.001
+    max_failures: 5000  # maximum consecutive failure limit. default: 5000
+arm_group:
+  default_planner_config: RRTConnect
+  planner_configs:
+    - SBL
+    - EST
+    - LBKPIECE
+    - BKPIECE
+    - KPIECE
+    - RRT
+    - RRTConnect
+    - RRTstar
+    - TRRT
+    - PRM
+    - PRMstar
+    - FMT
+    - BFMT
+    - PDST
+    - STRIDE
+    - BiTRRT
+    - LBTRRT
+    - BiEST
+    - ProjEST
+    - LazyPRM
+    - LazyPRMstar
+    - SPARS
+    - SPARStwo
+  projection_evaluator: joints(joint2_to_joint1,joint3_to_joint2)
+  longest_valid_segment_fraction: 0.005
--- a/mecharm/mecharm_moveit/config/ros_controllers.yaml
+++ b/mecharm/mecharm_moveit/config/ros_controllers.yaml
@ -0,0 +1,27 @@
+# Simulation settings for using moveit_sim_controllers
+moveit_sim_hw_interface:
+  joint_model_group: arm_group
+  joint_model_group_pose: init_pose
+# Settings for ros_control_boilerplate control loop
+generic_hw_control_loop:
+  loop_hz: 300
+  cycle_time_error_threshold: 0.01
+# Settings for ros_control hardware interface
+hardware_interface:
+  joints:
+    - vitual_joint
+    - joint1_to_base
+    - joint2_to_joint1
+    - joint3_to_joint2
+    - joint4_to_joint3
+    - joint5_to_joint4
+    - joint6_to_joint5
+    # - joint6output_to_joint6
+  sim_control_mode: 1  # 0: position, 1: velocity
+# Publish all joint states
+# Creates the /joint_states topic necessary in ROS
+joint_state_controller:
+  type: joint_state_controller/JointStateController
+  publish_rate: 50
+controller_list:
+  []
--- a/mecharm/mecharm_moveit/config/sensors_3d.yaml
+++ b/mecharm/mecharm_moveit/config/sensors_3d.yaml
@ -0,0 +1,10 @@
+# The name of this file shouldn't be changed, or else the Setup Assistant won't detect it
+sensors:
+  - filtered_cloud_topic: filtered_cloud
+    max_range: 5.0
+    max_update_rate: 1.0
+    padding_offset: 0.1
+    padding_scale: 1.0
+    point_cloud_topic: /head_mount_kinect/depth_registered/points
+    point_subsample: 1
+    sensor_plugin: occupancy_map_monitor/PointCloudOctomapUpdater
--- a/mecharm/mecharm_moveit/launch/chomp_planning_pipeline.launch.xml
+++ b/mecharm/mecharm_moveit/launch/chomp_planning_pipeline.launch.xml
@ -0,0 +1,10 @@
+<launch>
+   <!-- CHOMP Plugin for MoveIt! -->
+   <arg name="planning_plugin" value="chomp_interface/CHOMPPlanner" />
+   <arg name="start_state_max_bounds_error" value="0.1" />
+
+   <param name="planning_plugin" value="$(arg planning_plugin)" />
+   <param name="start_state_max_bounds_error" value="$(arg start_state_max_bounds_error)" />
+
+   <rosparam command="load" file="$(find mecharm_moveit)/config/chomp_planning.yaml" />
+</launch>
--- a/mecharm/mecharm_moveit/launch/default_warehouse_db.launch
+++ b/mecharm/mecharm_moveit/launch/default_warehouse_db.launch
@ -0,0 +1,15 @@
+<launch>
+
+  <arg name="reset" default="false"/>
+  <!-- If not specified, we'll use a default database location -->
+  <arg name="moveit_warehouse_database_path" default="$(find mecharm_moveit)/default_warehouse_mongo_db" />
+
+  <!-- Launch the warehouse with the configured database location -->
+  <include file="$(find mecharm_moveit)/launch/warehouse.launch">
+    <arg name="moveit_warehouse_database_path" value="$(arg moveit_warehouse_database_path)" />
+  </include>
+
+  <!-- If we want to reset the database, run this node -->
+  <node if="$(arg reset)" name="$(anon moveit_default_db_reset)" type="moveit_init_demo_warehouse" pkg="moveit_ros_warehouse" respawn="false" output="screen" />
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/demo.launch
+++ b/mecharm/mecharm_moveit/launch/demo.launch
@ -0,0 +1,57 @@
+<launch>
+
+  <!-- By default, we do not start a database (it can be large) -->
+  <arg name="db" default="false" />
+  <!-- Allow user to specify database location -->
+  <arg name="db_path" default="$(find mecharm_moveit)/default_warehouse_mongo_db" />
+
+  <!-- By default, we are not in debug mode -->
+  <arg name="debug" default="false" />
+
+  <!--
+  By default, hide joint_state_publisher's GUI
+
+  MoveIt!'s "demo" mode replaces the real robot driver with the joint_state_publisher.
+  The latter one maintains and publishes the current joint configuration of the simulated robot.
+  It also provides a GUI to move the simulated robot around "manually".
+  This corresponds to moving around the real robot without the use of MoveIt.
+  -->
+  <arg name="use_gui" default="false" />
+
+  <!-- Load the URDF, SRDF and other .yaml configuration files on the param server -->
+  <include file="$(find mecharm_moveit)/launch/planning_context.launch">
+    <arg name="load_robot_description" value="true"/>
+  </include>
+
+  <!-- If needed, broadcast static tf for robot root -->
+  
+
+  <!-- We do not have a robot connected, so publish fake joint states -->
+  <node name="joint_state_publisher" pkg="joint_state_publisher" type="joint_state_publisher">
+    <param name="use_gui" value="$(arg use_gui)"/>
+    <rosparam param="source_list">[move_group/fake_controller_joint_states]</rosparam>
+  </node>
+
+  <!-- Given the published joint states, publish tf for the robot links -->
+  <node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" respawn="true" output="screen" />
+
+  <!-- Run the main MoveIt! executable without trajectory execution (we do not have controllers configured by default) -->
+  <include file="$(find mecharm_moveit)/launch/move_group.launch">
+    <arg name="allow_trajectory_execution" value="true"/>
+    <arg name="fake_execution" value="true"/>
+    <arg name="info" value="true"/>
+    <arg name="debug" value="$(arg debug)"/>
+  </include>
+
+  <!-- Run Rviz and load the default config to see the state of the move_group node -->
+  <include file="$(find mecharm_moveit)/launch/moveit_rviz.launch">
+    <arg name="config" value="true"/>
+    <arg name="debug" value="$(arg debug)"/>
+  </include>
+
+  <!-- If database loading was enabled, start mongodb as well -->
+  <include file="$(find mecharm_moveit)/launch/default_warehouse_db.launch" if="$(arg db)">
+    <arg name="moveit_warehouse_database_path" value="$(arg db_path)"/>
+  </include>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/demo_gazebo.launch
+++ b/mecharm/mecharm_moveit/launch/demo_gazebo.launch
@ -0,0 +1,70 @@
+<launch>
+
+  <!-- By default, we do not start a database (it can be large) -->
+  <arg name="db" default="false" />
+  <!-- Allow user to specify database location -->
+  <arg name="db_path" default="$(find mecharm_moveit)/default_warehouse_mongo_db" />
+
+  <!-- By default, we are not in debug mode -->
+  <arg name="debug" default="false" />
+
+  <!--
+  By default, hide joint_state_publisher's GUI
+
+  MoveIt!'s "demo" mode replaces the real robot driver with the joint_state_publisher.
+  The latter one maintains and publishes the current joint configuration of the simulated robot.
+  It also provides a GUI to move the simulated robot around "manually".
+  This corresponds to moving around the real robot without the use of MoveIt.
+  -->
+  <arg name="use_gui" default="false" />
+
+  <!-- Gazebo specific options -->
+  <arg name="gazebo_gui" default="true"/>
+  <arg name="paused" default="false"/>
+  <!-- By default, use the urdf location provided from the package -->
+  <arg name="urdf_path" default="$(find mycobot_description)/urdf/mecharm/mecharm_urdf.urdf"/>
+
+  <!-- launch the gazebo simulator and spawn the robot -->
+  <include file="$(find mecharm_moveit)/launch/gazebo.launch" >
+    <arg name="paused" value="$(arg paused)"/>
+    <arg name="gazebo_gui" value="$(arg gazebo_gui)"/>
+    <arg name="urdf_path" value="$(arg urdf_path)"/>
+  </include>
+
+  <!-- Load the URDF, SRDF and other .yaml configuration files on the param server -->
+  <include file="$(find mecharm_moveit)/launch/planning_context.launch">
+    <arg name="load_robot_description" value="false"/>
+  </include>
+
+  <!-- If needed, broadcast static tf for robot root -->
+  
+
+  <!-- We do not have a robot connected, so publish fake joint states -->
+  <node name="joint_state_publisher" pkg="joint_state_publisher" type="joint_state_publisher">
+    <param name="use_gui" value="$(arg use_gui)"/>
+    <rosparam param="source_list">[/joint_states]</rosparam>
+  </node>
+
+  <!-- Given the published joint states, publish tf for the robot links -->
+  <node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" respawn="true" output="screen" />
+
+  <!-- Run the main MoveIt! executable without trajectory execution (we do not have controllers configured by default) -->
+  <include file="$(find mecharm_moveit)/launch/move_group.launch">
+    <arg name="allow_trajectory_execution" value="true"/>
+    <arg name="fake_execution" value="false"/>
+    <arg name="info" value="true"/>
+    <arg name="debug" value="$(arg debug)"/>
+  </include>  
+
+  <!-- Run Rviz and load the default config to see the state of the move_group node -->
+  <include file="$(find mecharm_moveit)/launch/moveit_rviz.launch">
+    <arg name="config" value="true"/>
+    <arg name="debug" value="$(arg debug)"/>
+  </include>
+
+  <!-- If database loading was enabled, start mongodb as well -->
+  <include file="$(find mecharm_moveit)/launch/default_warehouse_db.launch" if="$(arg db)">
+    <arg name="moveit_warehouse_database_path" value="$(arg db_path)"/>
+  </include>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/fake_moveit_controller_manager.launch.xml
+++ b/mecharm/mecharm_moveit/launch/fake_moveit_controller_manager.launch.xml
@ -0,0 +1,9 @@
+<launch>
+
+  <!-- Set the param that trajectory_execution_manager needs to find the controller plugin -->
+  <param name="moveit_controller_manager" value="moveit_fake_controller_manager/MoveItFakeControllerManager"/>
+
+  <!-- The rest of the params are specific to this plugin -->
+  <rosparam file="$(find mecharm_moveit)/config/fake_controllers.yaml"/>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/firefighter_moveit_controller_manager.launch.xml
+++ b/mecharm/mecharm_moveit/launch/firefighter_moveit_controller_manager.launch.xml
@ -0,0 +1,10 @@
+<launch>
+
+  <!-- loads moveit_controller_manager on the parameter server which is taken as argument 
+    if no argument is passed, moveit_simple_controller_manager will be set -->
+  <arg name="moveit_controller_manager" default="moveit_simple_controller_manager/MoveItSimpleControllerManager" />
+  <param name="moveit_controller_manager" value="$(arg moveit_controller_manager)"/>
+
+  <!-- loads ros_controllers to the param server -->
+  <rosparam file="$(find mecharm_moveit)/config/ros_controllers.yaml"/>
+</launch>
--- a/mecharm/mecharm_moveit/launch/firefighter_moveit_sensor_manager.launch.xml
+++ b/mecharm/mecharm_moveit/launch/firefighter_moveit_sensor_manager.launch.xml
@ -0,0 +1,3 @@
+<launch>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/gazebo.launch
+++ b/mecharm/mecharm_moveit/launch/gazebo.launch
@ -0,0 +1,23 @@
+<?xml version="1.0"?>
+<launch>
+  <arg name="paused" default="false"/>
+  <arg name="gazebo_gui" default="true"/>
+  <arg name="urdf_path" default="$(find mycobot_description)/urdf/mecharm/mecharm_urdf.urdf"/>
+
+  <!-- startup simulated world -->
+  <include file="$(find gazebo_ros)/launch/empty_world.launch">
+    <arg name="world_name" default="worlds/empty.world"/>
+    <arg name="paused" value="$(arg paused)"/>
+    <arg name="gui" value="$(arg gazebo_gui)"/>
+  </include>
+
+  <!-- send robot urdf to param server -->
+  <param name="robot_description" textfile="$(arg urdf_path)" />
+
+  <!-- push robot_description to factory and spawn robot in gazebo at the origin, change x,y,z arguments to spawn in a different position -->
+  <node name="spawn_gazebo_model" pkg="gazebo_ros" type="spawn_model" args="-urdf -param robot_description -model robot -x 0 -y 0 -z 0"
+    respawn="false" output="screen" />
+
+  <include file="$(find mecharm_moveit)/launch/ros_controllers.launch"/>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/joystick_control.launch
+++ b/mecharm/mecharm_moveit/launch/joystick_control.launch
@ -0,0 +1,17 @@
+<launch>
+  <!-- See moveit_ros/visualization/doc/joystick.rst for documentation -->
+
+  <arg name="dev" default="/dev/input/js0" />
+
+  <!-- Launch joy node -->
+  <node pkg="joy" type="joy_node" name="joy">
+    <param name="dev" value="$(arg dev)" /> <!-- Customize this to match the location your joystick is plugged in on-->
+    <param name="deadzone" value="0.2" />
+    <param name="autorepeat_rate" value="40" />
+    <param name="coalesce_interval" value="0.025" />
+  </node>
+
+  <!-- Launch python interface -->
+  <node pkg="moveit_ros_visualization" type="moveit_joy.py" output="screen" name="moveit_joy"/>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/mecharm_moveit.launch
+++ b/mecharm/mecharm_moveit/launch/mecharm_moveit.launch
@ -0,0 +1,57 @@
+<launch>
+
+  <!-- By default, we do not start a database (it can be large) -->
+  <arg name="db" default="false" />
+  <!-- Allow user to specify database location -->
+  <arg name="db_path" default="$(find mecharm_moveit)/default_warehouse_mongo_db" />
+
+  <!-- By default, we are not in debug mode -->
+  <arg name="debug" default="false" />
+
+  <!--
+  By default, hide joint_state_publisher's GUI
+
+  MoveIt!'s "demo" mode replaces the real robot driver with the joint_state_publisher.
+  The latter one maintains and publishes the current joint configuration of the simulated robot.
+  It also provides a GUI to move the simulated robot around "manually".
+  This corresponds to moving around the real robot without the use of MoveIt.
+  -->
+  <arg name="use_gui" default="false" />
+
+  <!-- Load the URDF, SRDF and other .yaml configuration files on the param server -->
+  <include file="$(find mecharm_moveit)/launch/planning_context.launch">
+    <arg name="load_robot_description" value="true"/>
+  </include>
+
+  <!-- If needed, broadcast static tf for robot root -->
+  
+
+  <!-- We do not have a robot connected, so publish fake joint states -->
+  <node name="joint_state_publisher" pkg="joint_state_publisher" type="joint_state_publisher">
+    <param name="use_gui" value="$(arg use_gui)"/>
+    <rosparam param="source_list">[move_group/fake_controller_joint_states]</rosparam>
+  </node>
+
+  <!-- Given the published joint states, publish tf for the robot links -->
+  <node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" respawn="true" output="screen" />
+
+  <!-- Run the main MoveIt! executable without trajectory execution (we do not have controllers configured by default) -->
+  <include file="$(find mecharm_moveit)/launch/move_group.launch">
+    <arg name="allow_trajectory_execution" value="true"/>
+    <arg name="fake_execution" value="true"/>
+    <arg name="info" value="true"/>
+    <arg name="debug" value="$(arg debug)"/>
+  </include>
+
+  <!-- Run Rviz and load the default config to see the state of the move_group node -->
+  <include file="$(find mecharm_moveit)/launch/moveit_rviz.launch">
+    <arg name="config" value="true"/>
+    <arg name="debug" value="$(arg debug)"/>
+  </include>
+
+  <!-- If database loading was enabled, start mongodb as well -->
+  <include file="$(find mecharm_moveit)/launch/default_warehouse_db.launch" if="$(arg db)">
+    <arg name="moveit_warehouse_database_path" value="$(arg db_path)"/>
+  </include>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/move_group.launch
+++ b/mecharm/mecharm_moveit/launch/move_group.launch
@ -0,0 +1,77 @@
+<launch>
+
+  <include file="$(find mecharm_moveit)/launch/planning_context.launch" />
+
+  <!-- GDB Debug Option -->
+  <arg name="debug" default="false" />
+  <arg unless="$(arg debug)" name="launch_prefix" value="" />
+  <arg     if="$(arg debug)" name="launch_prefix"
+	   value="gdb -x $(find mecharm_moveit)/launch/gdb_settings.gdb --ex run --args" />
+
+  <!-- Verbose Mode Option -->
+  <arg name="info" default="$(arg debug)" />
+  <arg unless="$(arg info)" name="command_args" value="" />
+  <arg     if="$(arg info)" name="command_args" value="--debug" />
+
+  <!-- move_group settings -->
+  <arg name="allow_trajectory_execution" default="true"/>
+  <arg name="fake_execution" default="false"/>
+  <arg name="max_safe_path_cost" default="1"/>
+  <arg name="jiggle_fraction" default="0.05" />
+  <arg name="publish_monitored_planning_scene" default="true"/>
+
+  <arg name="capabilities" default=""/>
+  <arg name="disable_capabilities" default=""/>
+  <!-- load these non-default MoveGroup capabilities (space seperated) -->
+  <!--
+  <arg name="capabilities" value="
+                a_package/AwsomeMotionPlanningCapability
+                another_package/GraspPlanningPipeline
+                " />
+  -->
+
+  <!-- inhibit these default MoveGroup capabilities (space seperated) -->
+  <!--
+  <arg name="disable_capabilities" value="
+                move_group/MoveGroupKinematicsService
+                move_group/ClearOctomapService
+                " />
+  -->
+
+  <!-- Planning Functionality -->
+  <include ns="move_group" file="$(find mecharm_moveit)/launch/planning_pipeline.launch.xml">
+    <arg name="pipeline" value="ompl" />
+  </include>
+
+  <!-- Trajectory Execution Functionality -->
+  <include ns="move_group" file="$(find mecharm_moveit)/launch/trajectory_execution.launch.xml" if="$(arg allow_trajectory_execution)">
+    <arg name="moveit_manage_controllers" value="true" />
+    <arg name="moveit_controller_manager" value="firefighter" unless="$(arg fake_execution)"/>
+    <arg name="moveit_controller_manager" value="fake" if="$(arg fake_execution)"/>
+  </include>
+
+  <!-- Sensors Functionality -->
+  <include ns="move_group" file="$(find mecharm_moveit)/launch/sensor_manager.launch.xml" if="$(arg allow_trajectory_execution)">
+    <arg name="moveit_sensor_manager" value="firefighter" />
+  </include>
+
+  <!-- Start the actual move_group node/action server -->
+  <node name="move_group" launch-prefix="$(arg launch_prefix)" pkg="moveit_ros_move_group" type="move_group" respawn="false" output="screen" args="$(arg command_args)">
+    <!-- Set the display variable, in case OpenGL code is used internally -->
+    <env name="DISPLAY" value="$(optenv DISPLAY :0)" />
+
+    <param name="allow_trajectory_execution" value="$(arg allow_trajectory_execution)"/>
+    <param name="max_safe_path_cost" value="$(arg max_safe_path_cost)"/>
+    <param name="jiggle_fraction" value="$(arg jiggle_fraction)" />
+    <param name="capabilities" value="$(arg capabilities)"/>
+    <param name="disable_capabilities" value="$(arg disable_capabilities)"/>
+
+
+    <!-- Publish the planning scene of the physical robot so that rviz plugin can know actual robot -->
+    <param name="planning_scene_monitor/publish_planning_scene" value="$(arg publish_monitored_planning_scene)" />
+    <param name="planning_scene_monitor/publish_geometry_updates" value="$(arg publish_monitored_planning_scene)" />
+    <param name="planning_scene_monitor/publish_state_updates" value="$(arg publish_monitored_planning_scene)" />
+    <param name="planning_scene_monitor/publish_transforms_updates" value="$(arg publish_monitored_planning_scene)" />
+  </node>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/moveit.rviz
+++ b/mecharm/mecharm_moveit/launch/moveit.rviz
@ -0,0 +1,250 @@
+Panels:
+  - Class: rviz/Displays
+    Help Height: 84
+    Name: Displays
+    Property Tree Widget:
+      Expanded:
+        - /MotionPlanning1
+        - /MotionPlanning1/Scene Geometry1
+        - /MotionPlanning1/Scene Robot1
+        - /MotionPlanning1/Planning Request1
+        - /MotionPlanning1/Planned Path1
+      Splitter Ratio: 0.742560029
+    Tree Height: 195
+  - Class: rviz/Help
+    Name: Help
+  - Class: rviz/Views
+    Expanded:
+      - /Current View1
+    Name: Views
+    Splitter Ratio: 0.5
+Toolbars:
+  toolButtonStyle: 2
+Visualization Manager:
+  Class: ""
+  Displays:
+    - Alpha: 0.5
+      Cell Size: 1
+      Class: rviz/Grid
+      Color: 160; 160; 164
+      Enabled: true
+      Line Style:
+        Line Width: 0.0299999993
+        Value: Lines
+      Name: Grid
+      Normal Cell Count: 0
+      Offset:
+        X: 0
+        Y: 0
+        Z: 0
+      Plane: XY
+      Plane Cell Count: 10
+      Reference Frame: <Fixed Frame>
+      Value: true
+    - Acceleration_Scaling_Factor: 1
+      Class: moveit_rviz_plugin/MotionPlanning
+      Enabled: true
+      Move Group Namespace: ""
+      MoveIt_Allow_Approximate_IK: false
+      MoveIt_Allow_External_Program: false
+      MoveIt_Allow_Replanning: false
+      MoveIt_Allow_Sensor_Positioning: false
+      MoveIt_Goal_Tolerance: 0
+      MoveIt_Planning_Attempts: 10
+      MoveIt_Planning_Time: 5
+      MoveIt_Use_Constraint_Aware_IK: true
+      MoveIt_Warehouse_Host: 127.0.0.1
+      MoveIt_Warehouse_Port: 33829
+      MoveIt_Workspace:
+        Center:
+          X: 0
+          Y: 0
+          Z: 0
+        Size:
+          X: 2
+          Y: 2
+          Z: 2
+      Name: MotionPlanning
+      Planned Path:
+        Color Enabled: false
+        Interrupt Display: false
+        Links:
+          All Links Enabled: true
+          Expand Joint Details: false
+          Expand Link Details: false
+          Expand Tree: false
+          Link Tree Style: Links in Alphabetic Order
+          base:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link1:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link2:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link3:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link4:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link5:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link6:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+        Loop Animation: false
+        Robot Alpha: 0.5
+        Robot Color: 150; 50; 150
+        Show Robot Collision: false
+        Show Robot Visual: true
+        Show Trail: false
+        State Display Time: 0.05 s
+        Trail Step Size: 1
+        Trajectory Topic: move_group/display_planned_path
+      Planning Metrics:
+        Payload: 1
+        Show Joint Torques: false
+        Show Manipulability: false
+        Show Manipulability Index: false
+        Show Weight Limit: false
+        TextHeight: 0.0799999982
+      Planning Request:
+        Colliding Link Color: 255; 0; 0
+        Goal State Alpha: 1
+        Goal State Color: 250; 128; 0
+        Interactive Marker Size: 0.100000001
+        Joint Violation Color: 255; 0; 255
+        Planning Group: arm_group
+        Query Goal State: true
+        Query Start State: true
+        Show Workspace: false
+        Start State Alpha: 1
+        Start State Color: 0; 255; 0
+      Planning Scene Topic: move_group/monitored_planning_scene
+      Robot Description: robot_description
+      Scene Geometry:
+        Scene Alpha: 1
+        Scene Color: 50; 230; 50
+        Scene Display Time: 0.200000003
+        Show Scene Geometry: true
+        Voxel Coloring: Z-Axis
+        Voxel Rendering: Occupied Voxels
+      Scene Robot:
+        Attached Body Color: 150; 50; 150
+        Links:
+          All Links Enabled: true
+          Expand Joint Details: false
+          Expand Link Details: false
+          Expand Tree: false
+          Link Tree Style: Links in Alphabetic Order
+          base:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link1:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link2:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link3:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link4:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link5:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+          link6:
+            Alpha: 1
+            Show Axes: false
+            Show Trail: false
+            Value: true
+        Robot Alpha: 0.5
+        Show Robot Collision: false
+        Show Robot Visual: false
+      Value: true
+      Velocity_Scaling_Factor: 1
+  Enabled: true
+  Global Options:
+    Background Color: 48; 48; 48
+    Default Light: true
+    Fixed Frame: base
+    Frame Rate: 30
+  Name: root
+  Tools:
+    - Class: rviz/Interact
+      Hide Inactive Objects: true
+    - Class: rviz/MoveCamera
+    - Class: rviz/Select
+  Value: true
+  Views:
+    Current:
+      Class: rviz/XYOrbit
+      Distance: 1.39158678
+      Enable Stereo Rendering:
+        Stereo Eye Separation: 0.0599999987
+        Stereo Focal Distance: 1
+        Swap Stereo Eyes: false
+        Value: false
+      Focal Point:
+        X: 0.113567002
+        Y: 0.105920002
+        Z: 2.23518001e-07
+      Focal Shape Fixed Size: true
+      Focal Shape Size: 0.0500000007
+      Invert Z Axis: false
+      Name: Current View
+      Near Clip Distance: 0.00999999978
+      Pitch: 0.0947966129
+      Target Frame: link1
+      Value: XYOrbit (rviz)
+      Yaw: 2.39357972
+    Saved: ~
+Window Geometry:
+  Displays:
+    collapsed: false
+  Height: 898
+  Help:
+    collapsed: false
+  Hide Left Dock: false
+  Hide Right Dock: false
+  MotionPlanning:
+    collapsed: false
+  MotionPlanning - Trajectory Slider:
+    collapsed: false
+  QMainWindow State: 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
+  Views:
+    collapsed: false
+  Width: 1828
+  X: 92
+  Y: 24
--- a/mecharm/mecharm_moveit/launch/moveit_rviz.launch
+++ b/mecharm/mecharm_moveit/launch/moveit_rviz.launch
@ -0,0 +1,16 @@
+<launch>
+
+  <arg name="debug" default="false" />
+  <arg unless="$(arg debug)" name="launch_prefix" value="" />
+  <arg     if="$(arg debug)" name="launch_prefix" value="gdb --ex run --args" />
+
+  <arg name="config" default="false" />
+  <arg unless="$(arg config)" name="command_args" value="" />
+  <arg     if="$(arg config)" name="command_args" value="-d $(find mecharm_moveit)/launch/moveit.rviz" />
+
+  <node name="$(anon rviz)" launch-prefix="$(arg launch_prefix)" pkg="rviz" type="rviz" respawn="false"
+	args="$(arg command_args)" output="screen">
+    <rosparam command="load" file="$(find mecharm_moveit)/config/kinematics.yaml"/>
+  </node>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/ompl_planning_pipeline.launch.xml
+++ b/mecharm/mecharm_moveit/launch/ompl_planning_pipeline.launch.xml
@ -0,0 +1,22 @@
+<launch>
+
+  <!-- OMPL Plugin for MoveIt! -->
+  <arg name="planning_plugin" value="ompl_interface/OMPLPlanner" />
+
+  <!-- The request adapters (plugins) used when planning with OMPL.
+       ORDER MATTERS -->
+  <arg name="planning_adapters" value="default_planner_request_adapters/AddTimeParameterization
+				       default_planner_request_adapters/FixWorkspaceBounds
+				       default_planner_request_adapters/FixStartStateBounds
+				       default_planner_request_adapters/FixStartStateCollision
+				       default_planner_request_adapters/FixStartStatePathConstraints" />
+
+  <arg name="start_state_max_bounds_error" value="0.1" />
+
+  <param name="planning_plugin" value="$(arg planning_plugin)" />
+  <param name="request_adapters" value="$(arg planning_adapters)" />
+  <param name="start_state_max_bounds_error" value="$(arg start_state_max_bounds_error)" />
+
+  <rosparam command="load" file="$(find mecharm_moveit)/config/ompl_planning.yaml"/>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/planning_context.launch
+++ b/mecharm/mecharm_moveit/launch/planning_context.launch
@ -0,0 +1,24 @@
+<launch>
+  <!-- By default we do not overwrite the URDF. Change the following to true to change the default behavior -->
+  <arg name="load_robot_description" default="false"/>
+
+  <!-- The name of the parameter under which the URDF is loaded -->
+  <arg name="robot_description" default="robot_description"/>
+
+  <!-- Load universal robot description format (URDF) -->
+  <param if="$(arg load_robot_description)" name="$(arg robot_description)" textfile="$(find mycobot_description)/urdf/mecharm/mecharm_urdf.urdf"/>
+
+  <!-- The semantic description that corresponds to the URDF -->
+  <param name="$(arg robot_description)_semantic" textfile="$(find mecharm_moveit)/config/firefighter.srdf" />
+
+  <!-- Load updated joint limits (override information from URDF) -->
+  <group ns="$(arg robot_description)_planning">
+    <rosparam command="load" file="$(find mecharm_moveit)/config/joint_limits.yaml"/>
+  </group>
+
+  <!-- Load default settings for kinematics; these settings are overridden by settings in a node's namespace -->
+  <group ns="$(arg robot_description)_kinematics">
+    <rosparam command="load" file="$(find mecharm_moveit)/config/kinematics.yaml"/>
+  </group>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/planning_pipeline.launch.xml
+++ b/mecharm/mecharm_moveit/launch/planning_pipeline.launch.xml
@ -0,0 +1,10 @@
+<launch>
+
+  <!-- This file makes it easy to include different planning pipelines;
+       It is assumed that all planning pipelines are named XXX_planning_pipeline.launch  -->
+
+  <arg name="pipeline" default="ompl" />
+
+  <include file="$(find mecharm_moveit)/launch/$(arg pipeline)_planning_pipeline.launch.xml" />
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/ros_controllers.launch
+++ b/mecharm/mecharm_moveit/launch/ros_controllers.launch
@ -0,0 +1,11 @@
+<?xml version="1.0"?>
+<launch>
+
+  <!-- Load joint controller configurations from YAML file to parameter server -->
+  <rosparam file="$(find mecharm_moveit)/config/ros_controllers.yaml" command="load"/>
+
+  <!-- Load the controllers -->
+  <node name="controller_spawner" pkg="controller_manager" type="spawner" respawn="false"
+    output="screen" args=""/>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/run_benchmark_ompl.launch
+++ b/mecharm/mecharm_moveit/launch/run_benchmark_ompl.launch
@ -0,0 +1,22 @@
+<launch>
+
+  <!-- This argument must specify the list of .cfg files to process for benchmarking -->
+  <arg name="cfg" />
+
+  <!-- Load URDF -->
+  <include file="$(find mecharm_moveit)/launch/planning_context.launch">
+    <arg name="load_robot_description" value="true"/>
+  </include>
+
+  <!-- Start the database -->
+  <include file="$(find mecharm_moveit)/launch/warehouse.launch">
+    <arg name="moveit_warehouse_database_path" value="moveit_ompl_benchmark_warehouse"/>
+  </include>
+
+  <!-- Start Benchmark Executable -->
+  <node name="$(anon moveit_benchmark)" pkg="moveit_ros_benchmarks" type="moveit_run_benchmark" args="$(arg cfg) --benchmark-planners" respawn="false" output="screen">
+    <rosparam command="load" file="$(find mecharm_moveit)/config/kinematics.yaml"/>
+    <rosparam command="load" file="$(find mecharm_moveit)/config/ompl_planning.yaml"/>
+  </node>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/sensor_manager.launch.xml
+++ b/mecharm/mecharm_moveit/launch/sensor_manager.launch.xml
@ -0,0 +1,17 @@
+<launch>
+
+  <!-- This file makes it easy to include the settings for sensor managers -->
+
+  <!-- Params for 3D sensors config -->
+  <rosparam command="load" file="$(find mecharm_moveit)/config/sensors_3d.yaml" />
+
+  <!-- Params for the octomap monitor -->
+  <!--  <param name="octomap_frame" type="string" value="some frame in which the robot moves" /> -->
+  <param name="octomap_resolution" type="double" value="0.025" />
+  <param name="max_range" type="double" value="5.0" />
+
+  <!-- Load the robot specific sensor manager; this sets the moveit_sensor_manager ROS parameter -->
+  <arg name="moveit_sensor_manager" default="firefighter" />
+  <include file="$(find mecharm_moveit)/launch/$(arg moveit_sensor_manager)_moveit_sensor_manager.launch.xml" />
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/setup_assistant.launch
+++ b/mecharm/mecharm_moveit/launch/setup_assistant.launch
@ -0,0 +1,15 @@
+<!-- Re-launch the MoveIt! Setup Assistant with this configuration package already loaded -->
+<launch>
+
+  <!-- Debug Info -->
+  <arg name="debug" default="false" />
+  <arg unless="$(arg debug)" name="launch_prefix" value="" />
+  <arg     if="$(arg debug)" name="launch_prefix" value="gdb --ex run --args" />
+
+  <!-- Run -->
+  <node pkg="moveit_setup_assistant" type="moveit_setup_assistant" name="moveit_setup_assistant"
+	args="--config_pkg=mecharm_moveit"
+	launch-prefix="$(arg launch_prefix)"
+        output="screen" />
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/trajectory_execution.launch.xml
+++ b/mecharm/mecharm_moveit/launch/trajectory_execution.launch.xml
@ -0,0 +1,20 @@
+<launch>
+
+  <!-- This file makes it easy to include the settings for trajectory execution  -->
+
+  <!-- Flag indicating whether MoveIt! is allowed to load/unload  or switch controllers -->
+  <arg name="moveit_manage_controllers" default="true"/>
+  <param name="moveit_manage_controllers" value="$(arg moveit_manage_controllers)"/>
+
+  <!-- When determining the expected duration of a trajectory, this multiplicative factor is applied to get the allowed duration of execution -->
+  <param name="trajectory_execution/allowed_execution_duration_scaling" value="1.2"/> <!-- default 1.2 -->
+  <!-- Allow more than the expected execution time before triggering a trajectory cancel (applied after scaling) -->
+  <param name="trajectory_execution/allowed_goal_duration_margin" value="0.5"/> <!-- default 0.5 -->
+  <!-- Allowed joint-value tolerance for validation that trajectory's first point matches current robot state -->
+  <param name="trajectory_execution/allowed_start_tolerance" value="0.01"/> <!-- default 0.01 -->
+
+  <!-- Load the robot specific controller manager; this sets the moveit_controller_manager ROS parameter -->
+  <arg name="moveit_controller_manager" default="firefighter" />
+  <include file="$(find mecharm_moveit)/launch/$(arg moveit_controller_manager)_moveit_controller_manager.launch.xml" />
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/warehouse.launch
+++ b/mecharm/mecharm_moveit/launch/warehouse.launch
@ -0,0 +1,15 @@
+<launch>
+
+  <!-- The path to the database must be specified -->
+  <arg name="moveit_warehouse_database_path" />
+
+  <!-- Load warehouse parameters -->
+  <include file="$(find mecharm_moveit)/launch/warehouse_settings.launch.xml" />
+
+  <!-- Run the DB server -->
+  <node name="$(anon mongo_wrapper_ros)" cwd="ROS_HOME" type="mongo_wrapper_ros.py" pkg="warehouse_ros_mongo">
+    <param name="overwrite" value="false"/>
+    <param name="database_path" value="$(arg moveit_warehouse_database_path)" />
+  </node>
+
+</launch>
--- a/mecharm/mecharm_moveit/launch/warehouse_settings.launch.xml
+++ b/mecharm/mecharm_moveit/launch/warehouse_settings.launch.xml
@ -0,0 +1,16 @@
+<launch>
+  <!-- Set the parameters for the warehouse and run the mongodb server. -->
+
+  <!-- The default DB port for moveit (not default MongoDB port to avoid potential conflicts) -->
+  <arg name="moveit_warehouse_port" default="33829" />
+
+  <!-- The default DB host for moveit -->
+  <arg name="moveit_warehouse_host" default="localhost" />
+
+  <!-- Set parameters for the warehouse -->
+  <param name="warehouse_port" value="$(arg moveit_warehouse_port)"/>
+  <param name="warehouse_host" value="$(arg moveit_warehouse_host)"/>
+  <param name="warehouse_exec" value="mongod" />
+  <param name="warehouse_plugin" value="warehouse_ros_mongo::MongoDatabaseConnection" />
+
+</launch>
--- a/mecharm/mecharm_moveit/package.xml
+++ b/mecharm/mecharm_moveit/package.xml
@ -0,0 +1,40 @@
+<package>
+
+  <name>mecharm_moveit</name>
+  <version>0.3.0</version>
+  <description>
+     An automatically generated package with all the configuration and launch files for using the firefighter with the MoveIt! Motion Planning Framework
+  </description>
+  <author email="weijian.wang@elephantrobotics.com">zachary</author>
+  <maintainer email="weijian.wang@elephantrobotics.com">zachary</maintainer>
+
+  <license>BSD</license>
+
+  <url type="website">http://moveit.ros.org/</url>
+  <url type="bugtracker">https://github.com/ros-planning/moveit/issues</url>
+  <url type="repository">https://github.com/ros-planning/moveit</url>
+
+  <buildtool_depend>catkin</buildtool_depend>
+
+  <run_depend>moveit_ros_move_group</run_depend>
+  <run_depend>moveit_fake_controller_manager</run_depend>
+  <run_depend>moveit_kinematics</run_depend>
+  <run_depend>moveit_planners_ompl</run_depend>
+  <run_depend>moveit_ros_visualization</run_depend>
+  <run_depend>moveit_setup_assistant</run_depend>
+  <run_depend>joint_state_publisher</run_depend>
+  <run_depend>robot_state_publisher</run_depend>
+  <run_depend>xacro</run_depend>
+  <!-- This package is referenced in the warehouse launch files, but does not build out of the box at the moment. Commented the dependency until this works. -->
+  <!-- <run_depend>warehouse_ros_mongo</run_depend> -->
+  <build_depend>roscpp</build_depend>
+  <build_depend>rospy</build_depend>
+  <build_depend>std_msgs</build_depend>
+  <build_depend>actionlib</build_depend>
+  <build_depend>moveit_msgs</build_depend>
+  <build_depend>mycobot_description</build_depend>
+
+  <run_depend>mycobot_description</run_depend>
+
+
+</package>
--- a/mecharm/mecharm_moveit/scripts/path_planning_and_obstacle_avoidance_demo.py
+++ b/mecharm/mecharm_moveit/scripts/path_planning_and_obstacle_avoidance_demo.py
@ -0,0 +1,132 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+import rospy, roslib, sys
+import moveit_commander
+from moveit_msgs.msg import RobotTrajectory
+from trajectory_msgs.msg import JointTrajectoryPoint
+
+from geometry_msgs.msg import PoseStamped, Pose
+from tf.transformations import euler_from_quaternion, quaternion_from_euler
+
+
+class MoveItPlanningDemo:
+    def __init__(self):
+        # API to initialize move_group. 初始化move_group的API
+        moveit_commander.roscpp_initialize(sys.argv)
+
+        # Initialize the ROS node,初始化ROS节点
+        rospy.init_node("moveit_ik_demo")
+
+        # Initialize the scene object to listen for changes in the external environment
+        # 初始化场景对象，用来监听外部环境的变化
+        self.scene = moveit_commander.PlanningSceneInterface()
+        rospy.sleep(1)
+
+        # Initialize self.arm group in the robotic arm that needs to be controlled by move group 
+        # 初始化需要使用move group控制的机械臂中的self.arm group
+        self.arm = moveit_commander.MoveGroupCommander("arm_group")
+
+        # Get the name of the terminal link. 获取终端link的名称
+        self.end_effector_link = self.arm.get_end_effector_link()
+
+        # Set the reference coordinate system used for the target position.
+        #  设置目标位置所使用的参考坐标系
+        self.reference_frame = "joint1"
+        self.arm.set_pose_reference_frame(self.reference_frame)
+
+        # Allow replanning when motion planning fails. 
+        # 当运动规划失败后，允许重新规划
+        self.arm.allow_replanning(True)
+
+        # Set the allowable error of position (unit: meter) and attitude (unit: radian). 
+        # 设置位置(单位：米)和姿态（单位：弧度）的允许误差
+        self.arm.set_goal_position_tolerance(0.01)
+        self.arm.set_goal_orientation_tolerance(0.05)
+
+    def moving(self):
+        # Control the robotic arm to return to the initialization position first. 控制机械臂先回到初始化位置
+        self.arm.set_named_target("init_pose")
+        self.arm.go()
+        rospy.sleep(2)
+
+        # Set the target pose in the robotic arm workspace, the position is described by x, y, z coordinates,
+        # 设置机械臂工作空间中的目标位姿，位置使用x、y、z坐标描述，
+        # Pose is described by quaternion, based on base_link coordinate system 
+        # 姿态使用四元数描述，基于base_link坐标系
+        target_pose = PoseStamped()
+        target_pose.header.frame_id = self.reference_frame
+        target_pose.header.stamp = rospy.Time.now()
+        target_pose.pose.position.x = 0.132
+        target_pose.pose.position.y = -0.150
+        target_pose.pose.position.z = 0.075
+        target_pose.pose.orientation.x = 0.026
+        target_pose.pose.orientation.y = 1.0
+        target_pose.pose.orientation.z = 0.0
+        target_pose.pose.orientation.w = 0.014
+
+        # Set the current state of the robot arm as the initial state of motion. 设置机器臂当前的状态作为运动初始状态
+        self.arm.set_start_state_to_current_state()
+
+        # Set the target pose of the terminal motion of the robotic arm. 设置机械臂终端运动的目标位姿
+        self.arm.set_pose_target(target_pose, self.end_effector_link)
+
+        traj = self.arm.plan()
+
+        # Control the motion of the robotic arm according to the planned motion path. 按照规划的运动路径控制机械臂运动
+        self.arm.execute(traj)
+        rospy.sleep(1)
+
+        # Control the terminal of the robotic arm to move 5cm to the right. Parameter 1 represents y, 0,1,2,3,4,5 represents xyzrpy
+        # 控制机械臂终端向右移动5cm 參数1是代表y， 0,1,2,3,4,5 代表xyzrpy
+        self.arm.shift_pose_target(1, 0.12, self.end_effector_link)
+        self.arm.go()
+        rospy.sleep(1)
+
+        self.arm.shift_pose_target(1, 0.1, self.end_effector_link)
+        self.arm.go()
+        rospy.sleep(1)
+
+        # Control the end of the robotic arm to rotate 90 degrees in reverse, 0,1,2,3,4,5 represents xyzrpy
+        # 控制机械臂终端反向旋转90度,  0,1,2,3,4,5 代表xyzrpy
+        # self.arm.shift_pose_target(3, -1.57, end_effector_link)
+        # self.arm.go()
+        # rospy.sleep(1)
+
+    def run(self):
+        self.scene.remove_world_object("suit")
+
+        self.moving()
+
+        # Add the environment. 添加环境
+        quat = quaternion_from_euler(3.1415, 0, -1.57)
+
+        suit_post = PoseStamped()
+        suit_post.header.frame_id = self.reference_frame
+        suit_post.pose.position.x = 0.0
+        suit_post.pose.position.y = 0.0
+        suit_post.pose.position.z = -0.02
+        suit_post.pose.orientation.x = quat[0]
+        suit_post.pose.orientation.y = quat[1]
+        suit_post.pose.orientation.z = quat[2]
+        suit_post.pose.orientation.w = quat[3]
+
+        suit_path = (
+            roslib.packages.get_pkg_dir("mycobot_description")
+            + "/urdf/mycobot/suit_env.dae"
+        )
+        # need `pyassimp==3.3`
+        self.scene.add_mesh("suit", suit_post, suit_path)
+        rospy.sleep(2)
+
+        # Run again if there is environmental impact. 有环境影响后再运行一次
+        self.moving()
+
+        # Close and exit moveit. 关闭并退出moveit
+        moveit_commander.roscpp_shutdown()
+        moveit_commander.os._exit(0)
+
+
+if __name__ == "__main__":
+    o = MoveItPlanningDemo()
+    o.run()
--- a/mecharm/mecharm_moveit/scripts/sync_plan.py
+++ b/mecharm/mecharm_moveit/scripts/sync_plan.py
@ -0,0 +1,42 @@
+#!/usr/bin/env python2
+# encoding=utf-8
+import time
+import rospy
+from sensor_msgs.msg import JointState
+
+from pymycobot.mycobot import MyCobot
+# from pymycobot.mypalletizer import MyPalletizer
+
+
+mc = None
+
+
+def callback(data):
+    rospy.loginfo(rospy.get_caller_id() + "%s", data)
+    data_list = []
+    for index, value in enumerate(data.position):
+        # if index != 2:
+        #     value *= -1
+        data_list.append(value)
+    # print("data_list:",data_list)
+    mc.send_radians(data_list, 80)
+
+
+def listener():
+    global mc
+    rospy.init_node("mypal_reciver", anonymous=True)
+
+    port = rospy.get_param("~port", "/dev/ttyUSB0")
+    baud = rospy.get_param("~baud", 115200)
+    print(port, baud)
+    mc = MyCobot(port, baud)
+
+    rospy.Subscriber("joint_states", JointState, callback)
+
+    # spin() simply keeps python from exiting until this node is stopped 
+    # spin()只是阻止python退出，直到该节点停止
+    rospy.spin()
+
+
+if __name__ == "__main__":
+    listener()
--- a/mecharm/mecharm_pi/config/mecharm_pi.rviz
+++ b/mecharm/mecharm_pi/config/mecharm_pi.rviz
@ -8,7 +8,7 @@ Panels:
        - /Status1
        - /TF1
      Splitter Ratio: 0.5
-    Tree Height: 619
+    Tree Height: 607
  - Class: rviz/Selection
    Name: Selection
  - Class: rviz/Tool Properties
@ -17,7 +17,7 @@ Panels:
      - /2D Nav Goal1
      - /Publish Point1
    Name: Tool Properties
-    Splitter Ratio: 0.588679016
+    Splitter Ratio: 0.5886790156364441
  - Class: rviz/Views
    Expanded:
      - /Current View1
@ -28,6 +28,8 @@ Panels:
    Name: Time
    SyncMode: 0
    SyncSource: ""
+Preferences:
+  PromptSaveOnExit: true
 Toolbars:
  toolButtonStyle: 2
 Visualization Manager:
@ -39,7 +41,7 @@ Visualization Manager:
      Color: 160; 160; 164
      Enabled: true
      Line Style:
-        Line Width: 0.0299999993
+        Line Width: 0.029999999329447746
        Value: Lines
      Name: Grid
      Normal Cell Count: 0
@ -107,33 +109,12 @@ Visualization Manager:
      Frame Timeout: 15
      Frames:
        All Enabled: true
-        base:
-          Value: true
-        link1:
-          Value: true
-        link2:
-          Value: true
-        link3:
-          Value: true
-        link4:
-          Value: true
-        link5:
-          Value: true
-        link6:
-          Value: true
-      Marker Scale: 0.300000012
+      Marker Scale: 0.20000000298023224
      Name: TF
      Show Arrows: true
      Show Axes: true
      Show Names: true
      Tree:
-        base:
-          link1:
-            link2:
-              link3:
-                link4:
-                  link5:
-                    link6:
        {}
      Update Interval: 0
      Value: true
@ -152,7 +133,10 @@ Visualization Manager:
    - Class: rviz/FocusCamera
    - Class: rviz/Measure
    - Class: rviz/SetInitialPose
+      Theta std deviation: 0.2617993950843811
      Topic: /initialpose
+      X std deviation: 0.5
+      Y std deviation: 0.5
    - Class: rviz/SetGoal
      Topic: /move_base_simple/goal
    - Class: rviz/PublishPoint
@ -162,9 +146,9 @@ Visualization Manager:
  Views:
    Current:
      Class: rviz/Orbit
-      Distance: 0.682552576
+      Distance: 1.3854260444641113
      Enable Stereo Rendering:
-        Stereo Eye Separation: 0.0599999987
+        Stereo Eye Separation: 0.05999999865889549
        Stereo Focal Distance: 1
        Swap Stereo Eyes: false
        Value: false
@ -173,22 +157,22 @@ Visualization Manager:
        Y: 0
        Z: 0
      Focal Shape Fixed Size: true
-      Focal Shape Size: 0.0500000007
+      Focal Shape Size: 0.05000000074505806
      Invert Z Axis: false
      Name: Current View
-      Near Clip Distance: 0.00999999978
-      Pitch: 0.469798148
+      Near Clip Distance: 0.009999999776482582
+      Pitch: 0.41979655623435974
      Target Frame: <Fixed Frame>
      Value: Orbit (rviz)
-      Yaw: 5.69176626
+      Yaw: 0.7135875821113586
    Saved: ~
 Window Geometry:
  Displays:
    collapsed: false
-  Height: 900
+  Height: 898
  Hide Left Dock: false
-  Hide Right Dock: false
-  QMainWindow State: 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
+  Hide Right Dock: true
+  QMainWindow State: 000000ff00000000fd00000004000000000000016a000002e8fc0200000008fb0000001200530065006c0065006300740069006f006e00000001e10000009b0000005c00fffffffb0000001e0054006f006f006c002000500072006f007000650072007400690065007302000001ed000001df00000185000000a3fb000000120056006900650077007300200054006f006f02000001df000002110000018500000122fb000000200054006f006f006c002000500072006f0070006500720074006900650073003203000002880000011d000002210000017afb000000100044006900730070006c006100790073010000003b000002e8000000c700fffffffb0000002000730065006c0065006300740069006f006e00200062007500660066006500720200000138000000aa0000023a00000294fb00000014005700690064006500530074006500720065006f02000000e6000000d2000003ee0000030bfb0000000c004b0069006e0065006300740200000186000001060000030c00000261000000010000010f000002e8fc0200000003fb0000001e0054006f006f006c002000500072006f00700065007200740069006500730100000041000000780000000000000000fb0000000a00560069006500770073000000003b000002e8000000a000fffffffb0000001200530065006c0065006300740069006f006e010000025a000000b200000000000000000000000200000490000000a9fc0100000001fb0000000a00560069006500770073030000004e00000080000002e10000019700000003000005070000003efc0100000002fb0000000800540069006d00650100000000000005070000024400fffffffb0000000800540069006d0065010000000000000450000000000000000000000397000002e800000004000000040000000800000008fc0000000100000002000000010000000a0054006f006f006c00730100000000ffffffff0000000000000000
  Selection:
    collapsed: false
  Time:
@ -196,7 +180,7 @@ Window Geometry:
  Tool Properties:
    collapsed: false
  Views:
-    collapsed: false
-  Width: 1855
-  X: 65
-  Y: 24
+    collapsed: true
+  Width: 1287
+  X: 254
+  Y: 43
--- a/mecharm/mecharm_pi/launch/teleop_keyboard.launch
+++ b/mecharm/mecharm_pi/launch/teleop_keyboard.launch
@ -6,7 +6,7 @@
 	<!-- Load file model ，加载文件模型-->
 	<!-- <arg name="model" default="$(find mycobot_description)/urdf/260_urdf/mycobot_urdf.urdf"/>
 	<arg name="rvizconfig" default="$(find mycobot_280)/config/mycobot.rviz" /> -->
-	<arg name="model" default="$(find mycobot_description)/urdf/mecharm/mecharm_pi.urdf"/>
+	<arg name="model" default="$(find mycobot_description)/urdf/mecharm_pi/mecharm_pi.urdf"/>
 	<arg name="rvizconfig" default="$(find mecharm_pi)/config/mecharm_pi.rviz" />
 	<arg name="gui" default="false" />

--- a/mecharm/mecharm_pi/scripts/listen_real_of_topic.py
+++ b/mecharm/mecharm_pi/scripts/listen_real_of_topic.py
--- a/mecharm/mecharm_pi/scripts/teleop_keyboard.py
+++ b/mecharm/mecharm_pi/scripts/teleop_keyboard.py
@ -151,8 +151,10 @@ def teleop_keyboard():
                    switch_gripper(False)
                elif key == "1":
                    rsp = set_angles(*init_pose)
+                    record_coords = [res.x, res.y, res.z, res.rx, res.ry, res.rz, speed, model]
                elif key in "2":
                    rsp = set_angles(*home_pose)
+                    record_coords = [res.x, res.y, res.z, res.rx, res.ry, res.rz, speed, model]
                elif key in "3":
                    rep = get_angles()
                    home_pose[0] = rep.joint_1
--- a/mecharm/mecharm_pi_moveit/launch/moveit.rviz
+++ b/mecharm/mecharm_pi_moveit/launch/moveit.rviz
@ -129,7 +129,7 @@ Visualization Manager:
        Colliding Link Color: 255; 0; 0
        Goal State Alpha: 1
        Goal State Color: 250; 128; 0
-        Interactive Marker Size: 0
+        Interactive Marker Size: 0.100000001
        Joint Violation Color: 255; 0; 255
        Planning Group: arm_group
        Query Goal State: true
@ -225,10 +225,10 @@ Visualization Manager:
      Invert Z Axis: false
      Name: Current View
      Near Clip Distance: 0.00999999978
-      Pitch: 0.164796591
+      Pitch: -0.1102034
      Target Frame: link1
      Value: XYOrbit (rviz)
-      Yaw: 5.75176573
+      Yaw: 1.43358004
    Saved: ~
 Window Geometry:
  Displays: